Well-Test Analysis Following a Closed-Fracture Acidizing Treatment

Mohamed Y. Sollman , James L. Hunt , Tahereh Daneshi
Spe Formation Evaluation 5 ( 04) 369 -374

5
1990
Wellbore Instability During Plasma Torch Drilling in Geothermal Reservoirs

Mahdi Habibpour , Philip Meredith , Mohamed Soliman , Mohsen Bazargan
49th U.S. Rock Mechanics/Geomechanics Symposium

3
2015
A 3D Elastoplastic Finite Element Model to Determine Stress Distribution around Boreholes Drilled in Compactible Rocks

Hossein Emadi , Mohamed Soliman , Elias Pirayesh , Stephen M. Morse
50th US Rock Mechanics / Geomechanics Symposium 2016 2370 -2380

1
2016
An Algorithm for the Calculation of Material Tangent Stiffness Tensor Using Extended Sandler-Rubin Cap Plasticity Model in Finite Element Analysis

Hossein Emadi , Mohamed Soliman , Elias Pirayesh , Stephen M. Morse
50th U.S. Rock Mechanics/Geomechanics Symposium

1
2016
Investigation of Sequential and Simultaneous Well Completion in Horizontal Wells using a Non-planar, Fully Coupled Hydraulic Fracture Simulator

Ali Rezaei , Mohamed Soliman , Mehdi Rafiee , Stephen Morse
49th U.S. Rock Mechanics/Geomechanics Symposium

14
2015
Fracturing Horizontal Wells

Mohamed Yousef Soliman , Mohamed Soliman , Ron Dusterhoft

6
2016
Investigation of Thermal Effects of Fluid Injection into Unconsolidated Formation in Microscopic Numerical Models

Mohamed Soliman , Wenjing Li , Yanhui Han
50th U.S. Rock Mechanics/Geomechanics Symposium

2016
EFFECT OF LITHOLOGY BARRIERS AND COMPOSITE LAYERING ON FRACTURE HEIGHT IN UNCONVENTIONAL RESERVOIRS

Lloyd Heinze , Mohamed Soliman , abdunaser Susi , Khalid Elwegaa
International Journal of Engineering

1
2018
Prediction of CO2 Minimum Miscibility Pressure Using an Augmented Machine-Learning-Based Model

Birol Dindoruk , Mohamed Soliman , Utkarsh Sinha
Spe Journal 1 -13

2021
The Role of Pore Pressure Depletion in Propagation of New Hydraulic Fractures during Refracturing of Horizontal Wells

Ali Rezaei , Mehdi Rafiee , Fahd Siddiqui , Mohamed Soliman
SPE Annual Technical Conference and Exhibition

6
2017
Microscopic numerical modeling of Thermo-Hydro-Mechanical mechanisms in fluid injection process in unconsolidated formation

Wenjing Li , Mohamed Soliman , Yanhui Han
Journal of Petroleum Science and Engineering 146 959 -970

13
2016
Optimum design for new gas lift valve seat

Fathi Elldakli , Mohamed Soliman
Journal of Petroleum Science and Engineering 149 456 -464

2
2017
Case History: 180 Degree Phasing Used in Fracturing of Low Resistivity Zones in Gulf of Mexico Wells

Mohamed Soliman , Richard Dupont , Bobby Chapman , Kent Folse
Offshore Technology Conference

1998
Testing and Production Performance of Slim-Hole Wells

Mehdi Azari , Mohamed Soliman , Curtis Wendler
SPE Western Regional Meeting

1995
Experimental Study of the Swelling Properties of Unconventional Shale Oil and the Effects of Invasion on Compressive Strength

Hossein Emadi , Mohamed Soliman , Robello Samuel , Malgorzata Ziaja
SPE Annual Technical Conference and Exhibition

11
2013
Hydraulic Fracturing Special Double Issue

Fred Aminzadeh , Mohamed Soliman , Dave Maity
Journal of Sustainable Energy Engineering 4 ( 3) 201 -206

2016
Review of Reservoir Engineering Aspects of Conformance Control Technology

Mehdi Azari , Mohamed Soliman
Permian Basin Oil and Gas Recovery Conference 257 -272

6
1996
A regression model for estimation of dew point pressure from down-hole fluid analyzer data

Ahmed Alzahabi , Ahmed El-Banbi , A. Alexandre Trindade , Mohamed Soliman
Journal of Petroleum Exploration and Production Technology 7 ( 4) 1173 -1183

2
2017
A Comparison between Evolutionary Metaheuristics and Mathematical Optimization to Solve the Wells Placement Problem

Ghazi AlQahtani , Ahmed Alzahabi , Ernee Kozyreff , Ismael R. de Jr. Farias
Advances in Chemical Engineering and Science 03 ( 04) 30 -36

7
2013