1
2018
Microstructural evolution during ultrafast heat treament of medium carbon steels
R. Petrov , R. Petrov , S. Papaefthymiou , F. Castro Cerda
International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, PTM 2015 569 -570
2015
Investigation of bainite formation in a chemically inhomogeneous medium carbon steel
Konstantinos Goulas , M. G. Mecozzi , J. Sietsma
International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, PTM 2015 71 -72
2015
Microstructure and mechanical properties of CuAl8Ni6 produced by Wire Arc Additive Manufacturing for marine applications
Constantinos Goulas , Marcel Hermans , Ian Richardson , Wei Ya
EUROMAT 2017: European Congress and Exhibition on Advanced Materials and Processes
2017
Microstructure and Mechanical Properties of Medium Carbon Steel Deposits Obtained via Wire and Arc Additive Manufacturing Using Metal-Cored Wire
Zidong Lin , Constantinos Goulas , Wei Ya , Marcel J.M. Hermans
Metals 9 ( 6) 673
8
2019
Failure Mechanisms of Mechanically and Thermally Produced Holes in High-Strength Low-Alloy Steel Plates Subjected to Fatigue Loading
Carlos Jiménez-Peña , Constantinos Goulas , Johannes Preußner , Dimitri Debruyne
Metals 10 ( 3) 318
9
2020
Study on the evolution mechanism of oxidation and copper diffusion and precipitation phenomena and their effect on the surface quality of steel plates
Spyros Papaefthymiou , Constantinos Goulas , Vasiliki Panteleakou
International Journal of Structural Integrity 6 ( 2) 214 -224
2
2015
The Effect of Heating Rate on the Microstructure of a Soft‐Annealed Medium Carbon Steel
Spyros Papaefthymiou , Constantinos Goulas , Felipe Manuel Castro Cerda , Nico Geerlofs
Steel Research International 88 ( 10) 1700158
12
2017
‘Flash’ Annealing in a Cold‐Rolled Low Carbon Steel Alloyed With Cr, Mn, Mo, and Nb: Part I ‐ Continuous Phase Transformations
Felipe Manuel Castro Cerda , Florian Vercruysse , Constantinos Goulas , Bernd Schulz
Steel Research International 90 ( 1) 1800098
5
2019
Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel
Constantinos Goulas , Ankit Kumar , Maria-Giuseppina Mecozzi , Felipe Manuel Castro-Cerda
Materials Characterization 152 67 -75
8
2019
Deposition of Stellite 6 alloy on steel substrates using wire and arc additive manufacturing
Zidong Lin , Wei Ya , Vignesh Venkata Subramanian , Constantinos Goulas
The International Journal of Advanced Manufacturing Technology 111 ( 1) 1 -16
17
2020
Microstructural and edge-quality effects on the fatigue performance of high strength steels
Carlos Jiménez Peña , Constantinos Goulas , Reza Hojjati Talemi , Barbara Rossi
Euromat 2017
2017
Quantitative sustainability assessment of metal additive manufacturing: A systematic review
Valentina Pusateri , Michael Zwicky Hauschild , Sami Kara , Constantinos Goulas
CIRP Journal of Manufacturing Science and Technology 49 95 -110
4
2024
More than 10 years of industry 4.0 in the Netherlands: an opinion on promises, achievements, and emerging challenges
Alberto Martinetti , Kostas Nizamis , P Chemweno , Constantinos Goulas
International Journal of Sustainable Engineering 17 ( 1) 1 -12
1
2024
Modeling the effect of processing parameters on temperature history in Directed Energy Deposition: an analytical and finite element approach
Mehran Ghasempour-Mouziraji , Daniel Afonso , Saman Hosseinzadeh , Constantinos Goulas
Rapid Prototyping Journal 30 ( 2) 338 -349
1
2024
Optimization of the Si3N4 coating formation through plasma spraying on Inconel 738
Mojtaba Najafizadeh , Mehran Ghasempour-Mouziraji , Sajad Shahrani , Mansoor Bozorg
Tribology-Materials, Surfaces & Interfaces 17 ( 4) 338 -351
1
2023
Mechanical and Biocorrosion Properties of Ti-XSn (X= 0, 5, 10, 15 wt.%) Alloys for Biomedical Application Fabricated by Powder Metallurgy
Mojtaba Najafizadeh , Mansoor Bozorg , Sahar Yazdi , Negar Sarrafan
Metallography, Microstructure, and Analysis 13 ( 1) 18 -28
2024
Technical challenges and future environmentally sustainable applications for multi-material additive manufacturing for metals
Valentina Pusateri , Constantinos Goulas , Stig Irving Olsen
IntechOpen
2
2023
Helical Propulsion in Low-Re Numbers with Near-Zero Angle of Attack
Leendert-Jan W Ligtenberg , Ilse AA Ekkelkamp , Frank R Halfwerk , Constantinos Goulas
2023 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2647 -2652
2
2023
Ex Vivo Validation of Magnetically Actuated Intravascular Untethered Robots in a Clinical Setting
Islam Khalil , Leendert-Jan Ligtenberg , Nicole Rabou , Constantinos Goulas
1
2023