Ali Alavi Nia
机构: Professor of Mechanical Engineering, Bu-Ali Sina University, Hamedan, Iran.
主页: basu.ac.ir
每年引用次数
引用次数
引用: 2,967
H-指数: 28
I10-指数 : 47
出版物: 102
Assessing the impact strength of steel fibre-reinforced concrete under quasi-static and high velocity dynamic impacts
M. Nili , A.H. Ghorbankhani , A. AlaviNia , M. Zolfaghari
Construction and Building Materials 107 264 -271
14
2016
A comment on the axial crush of metallic honeycombs by Wu and Jiang
G.H. Liaghat , A. Alavinia
International Journal of Impact Engineering 28 ( 10) 1143 -1146
24
2003
EXPERIMENTAL DETERMINATION OF PENETRATION CRITICAL ANGLE IN OBLIQUE IMPACT OF PROJECTILES ON METALLIC TARGETS
J Dolat Abadi Farahani , A Alavi Nia
Iranian Scientific Association of Energetic Materials 6 ( 313) 9 -23
2012
Experimental study of ballistic resistance of sandwich targets with aluminum face-sheet and graded foam core:
A Alavi Nia , M Kazemi
Journal of Sandwich Structures and Materials 22 ( 2) 461 -479
5
2020
Analytical and numerical investigations on the penetration of rigid projectiles into the foam core sandwich panels with aluminum face-sheets:
A Alavi Nia , M Kazemi
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 233 ( 1) 285 -298
2
2019
Numerical and analytical investigation of ballistic performance of composite targets with ceramic-polyurea-metal layers and optimization of the layer thicknesses
S Jafari , A Alavi Nia
Journal of the Australian Ceramic Society 59 ( 1) 231 -244
2023
Micromechanical Behavior of Potato Tissue by Scanning Electron Microscopy: Effect of Storage Time, Impact Energy and Curvature Radius of Impact Location
S Youneji , E Ahmadi , A Alavi Nia
Journal of Agricultural Machinery 8 ( 2) 347 -363
2018
Effect of circumferential gFooves geometries on crashworthiness of ax axially loaded cylindrical tubes
M Sedghi , A Alavi Nia , H Labbafi , P Atmri
16th Annual and 12th International Conference Mechanical Engineering
5
2008
An improvement on the Florence analytical equation for predicting the ballistic limit velocity of ceramic–aluminum targets and its development to ceramic–aluminum–polyurea panels
S Jafari , A Alavi Nia
Journal of the Brazilian Society of Mechanical Sciences and Engineering 44 ( 7) 277 -277
4
2022
Investigating the effect of ceramic-polyurea-aluminum layers on ballistic performance of composite target
S Jafari , A Alavi Nia
International Journal of Protective Structures 20414196231184585 -20414196231184585
2023
PARAMETRIC STUDY OF EXPLOSION IN SHAPED CHARGE
A Alavi Nia , J Payandeh Peyman
Proceedings of the 7~(th) International Conference on Shock and Impact Loads on Structures
2007
High velocity penetr semi-infinite concre
A Alavi Nia , M Zolfaghari
Investigation the effect of strain rate on mechanical behavior of aluminum thin-walled sections
A Alavi Nia , A Shirazi Beheshtiha
An experimental investigation on the deep drawing process of steel–brass bimetal sheets
Faramarz Fereshteh-Saniee , Ali Alavi-Nia , Amir Atrian-Afyani
Proceedings of metal forming. Krakow, Poland, Conference, Conference 63 -70
11
2008
Mechanical Engineering Department, School of Engineering, Bu-Ali Sina University, Hamedan 65178, Iran.
Faramarz Fereshteh-Saniee , Ali Alavi-Nia , Amir Atrian-Afyani
Metal Forming 1 63 -63
2008
Explosive forming of a steel cone using ALE method
R Emami , AA Nia
Steel Research International 81 ( 9) 737 -740
4
2010
Experimental Analysis of Energy Absorption and Deformation of Foam-Filled Thin-Walled Tubes With Various Section Geometry
V. Zareie A. Alavi Nia , A. Sabet Ghadam Isfahani
The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014), Tehran, Iran.
2014
Strength of reinforced composites with carbon nanotubes: an experimental study
B. Babaei A. Alavi Nia , A. Sadeghian Motahar
X-Mech 2012, Tehran, Iran.
2012
Parametricstudy of single-walled carbon nanotubes under loading with structural mechanics
G.H. Payandeh Peyman , J. , Alavi Nia , A. and Majzoobi
پانزدهمين کنگره شيمی ايران، همدان، ايران
2011
Numerical Study of X-Branch Tube Hydroforming Process
Mohsen Nikkhah Ali Alavi Nia
AMPT 2011, Istanbul, Turkey.
2011