Martin Kusý
机构: the Institute of Materials, the Faculty of Materials Science and Technology, the Slovak University
主页: stuba.sk
每年引用次数
引用次数
引用: 1,028
H-指数: 19
I10-指数 : 37
出版物: 122
Investigation of Microstructure of Differently Sub-Zero Treated Vanadis 6 Steel
J. Ďurica , M Kusý , P. Jurči , J. Ptačinová
International Journal of Materials and Metallurgical Engineering 12 ( 6) 257 -262
2018
The influence of multilayer architecture on the structure and mechanical properties of WNx/TiSiN coatings in comparison with WNx and TiSiN single layers
M Sahul , B Bočáková , K Smyrnova , M Haršáni
Smpte Journal 2413 ( 1) 012013
2022
Al-rare earth-transition metal alloys: fragility of melts and resistance to crystallization
Livio Battezzati , M Kusý , Mauro Palumbo , V Ronto
Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors 267 -278
5
2005
Influence of technological parameters on evolution of phases in Al-CMA composites prepared by powder metallurgy
I Černičková , L Roščák , F Ali , M Kusý
Kovove Mater.-Metallic Mater. 50 327 -334
3
2012
Oxidation stability of boride coatings
J Ptačinová , M Drienovský , M Palcut , R Čička
Kovove Materialy 53 ( 3) 175 -186
28
2015
CrxNy coatings prepared by magnetron sputtering method
M Beger , P Jurči , P Grgač , S Mečiar
Kovové Materiály-Metallic Materials 51 ( 1) 1 -10
11
2013
Nature of phases in boronized H11 hot work tool steel
P Jurči , M Hudáková , M Kusý
Kovove Mater 50 ( 3) 177 -184
11
2012
Effect of surface roughness on laser surface alloying of additively manufactured 17-4PH stainless steel
AS Chaus , OG Devoino , M Sahul , Ľ Vančo
Surface and Coatings Technology 454 129161 -129161
9
2023
The corrosion performance of Zn-Al-Mg based alloys with tin addition in neutral salt spray environment
J Gondek , M Babinec , M Kusý
J. Achiev. Mater. Manuf. Eng 70 70 -77
5
2015
Influence of sub-zero treatment in liquid helium and tempering on the microstructure of tool steel Vanadis 6
J Ptačinová , J Ďurica , P Jurči , M Kusý
Proceedings of the 28th International Conference on Metallurgy and Materials METAL
3
2019
Profile and area roughness determination of surfaces obtained by laser scanning confocal microscope
Tomas Bezak , M Kusý , M Eliáš , M Kopček
IN-TECH 2014: Proceedings of InternationalConference on Innovative Technologies 223 -226
2
2014
Contact diffusion boronizing of X210Cr12 tool steel
M Hudáková , M Kusý , V Sedlická , P GRGAČ
Proc. of Int. Conf.“Coatings and layers
2
2007
X-ray diffraction analysis of boronized K 190 PM tool steel
M Kusý , V Sedlická , M Hudáková , P GRGAČ
Proc. of 21st Int. Conf. on Heat Treatment 28 -30
2
Computer processing of data obtained using laser scanning confocal microscopy
M Kopček , T Bezák , M Eliáš , M Kusý
ERIN 2013. Proceedings of abstracts with full papers on CD: 7th international conference for young researchers and Ph. D. students. Published by STU, Bratislava, CD-ROM
1
2013
Microstructure evolution of an Al-Pd-Co alloy
L Kahalova , M Kusý , J Buršík , M Svoboda
Kovove Mater 46 221 -227
1
2008
Implications of the Presence of Y As a Reactive Element in Cathodic Vacuum ARC TiAlN Protective Coating for Tribological Applications
ОV Maksakova , VM Beresnev , SV Lytovchenko , M Čaplovičova
East European Journal of Physics ( 2) 398 -406
2024
Influence of Isothermal Annealing on Microstructure, Morphology, and Oxidation Behavior of AlTiSiN/TiSiN Nanocomposite Coatings. Nanomaterials 2023, 13, 474
P Šulhánek , L Ďuriška , M Palcut , P Babincová
2023
On Different Mechanisms of Primary Crystallization in Al-Ni-La-Zr Amorphous Alloys
L Battezzati , V Ronto , M Kusý
Properties and Applications of Nanocrystalline Alloys from Amorphous Precursors 279 -287
2005
Dvojité transparentné fasády budov. 2. diel: Vývoj, simulácia, experiment a konštrukčná tvorba fasády budovy NBS v Bratislave
B Bielek , M Bielek , M Kusý , P Paňák
Coreal, spol. s ro, Bratislava
5
2002
Quantitative X-Ray Diffraction Analysis of Zn-Al Based Alloys
M. Bonek , M. Babinec , M. Kusý , H. Suchánek
Archives of Metallurgy and Materials 959 -966
2020