A lipid coating on cotton fibers with enhanced adsorption capability for fabric functionalization
作者： Hongyan Diao , Xiangdong Liu , Feiya Fu , Qingbo Xu , Xinyue Hu
DOI: 10.1007/S10570-021-03893-9
关键词: Surface coating 、 Materials science 、 Polyacrylic acid 、 Hydrophobe 、 Adsorption 、 Chemical engineering 、 Surface modification 、 Cellulose 、 Coating 、 Fiber
摘要: Cotton is often modified to minimize its disadvantages during textile processing. However, most finishing methods suffer from difficulties in finding reagents and chemical aids. Here, we report a novel strategy based on combination of the pad-dry-cure method construction surface coating expand scope reagent simplify process. Polyacrylic acid (PAA) oligomer was first grafted onto cotton fiber surfaces via esterification between carboxyl groups PAA hydroxyl cellulose molecules surface. Hexadecanol then reacted with residual build lipid layer surfaces. The enhanced adsorption capability for hydrophobic verified three reagents: stearyl trimethyl ammoium bromide (STAB), 9,10-dihydro-9-oxaco-10-phospho-10-oxide (DOPO), 3,5-di-tert-butyl-4-hydroxybenzoic hexadecyl ester (Cyasorb 2908), which they offered bacterial-, flame-, UV-resistance fabrics, respectively. This can lead technologies suitable scale-up industry.
springer.com
sci-hub.st 参考文章(71)
Ying Zhang, Xuerong Fan, Surface modification of cotton fabrics by transesterification with ion-paired subtilisin Carlsberg in solvents Cellulose. ,vol. 17, pp. 903- 911 ,(2010) , 10.1007/S10570-010-9428-4
Jelena Vasiljević, Ivan Jerman, Gregor Jakša, Jenny Alongi, Giulio Malucelli, Milena Zorko, Brigita Tomšič, Barbara Simončič, Functionalization of cellulose fibres with DOPO-polysilsesquioxane flame retardant nanocoating Cellulose. ,vol. 22, pp. 1893- 1910 ,(2015) , 10.1007/S10570-015-0599-X
Carmen S.R. Freire, Armando J.D. Silvestre, Carlos Pascoal Neto, Alessandro Gandini, Pedro Fardim, Bjarne Holmbom, Surface characterization by XPS, contact angle measurements and ToF-SIMS of cellulose fibers partially esterified with fatty acids. Journal of Colloid and Interface Science. ,vol. 301, pp. 205- 209 ,(2006) , 10.1016/J.JCIS.2006.04.074
D Gaspar, S N Fernandes, A G de Oliveira, J G Fernandes, P Grey, R V Pontes, L Pereira, R Martins, M H Godinho, E Fortunato, Nanocrystalline cellulose applied simultaneously as the gate dielectric and the substrate in flexible field effect transistors. Nanotechnology. ,vol. 25, pp. 094008- 094008 ,(2014) , 10.1088/0957-4484/25/9/094008
Huan Qi, Yangen Huang, Bolin Ji, Gang Sun, Feng-ling Qing, Chunyan Hu, Kelu Yan, Anti-crease finishing of cotton fabrics based on crosslinking of cellulose with acryloyl malic acid Carbohydrate Polymers. ,vol. 135, pp. 86- 93 ,(2016) , 10.1016/J.CARBPOL.2015.08.014
Ângela S. Inácio, Neuza S. Domingues, Alexandra Nunes, Patrícia T. Martins, Maria J. Moreno, Luís M. Estronca, Rui Fernandes, António J. M. Moreno, Maria J. Borrego, João P. Gomes, Winchil L. C. Vaz, Otília V. Vieira, Quaternary ammonium surfactant structure determines selective toxicity towards bacteria: mechanisms of action and clinical implications in antibacterial prophylaxis Journal of Antimicrobial Chemotherapy. ,vol. 71, pp. 641- 654 ,(2016) , 10.1093/JAC/DKV405
Peng Wang, Fusheng Yang, Liang Li, Zaisheng Cai, Flame retardancy and mechanical properties of epoxy thermosets modified with a novel DOPO-based oligomer Polymer Degradation and Stability. ,vol. 129, pp. 156- 167 ,(2016) , 10.1016/J.POLYMDEGRADSTAB.2016.04.005
Huan Qi, Junbing Pan, Feng-ling Qing, Kelu Yan, Gang Sun, Anti-wrinkle and UV protective performance of cotton fabrics finished with 5-(carbonyloxy succinic)-benzene-1,2,4-tricarboxylic acid Carbohydrate Polymers. ,vol. 154, pp. 313- 319 ,(2016) , 10.1016/J.CARBPOL.2016.05.108
YanYan Zhang, QingBo Xu, FeiYa Fu, XiangDong Liu, Durable antimicrobial cotton textiles modified with inorganic nanoparticles Cellulose. ,vol. 23, pp. 2791- 2808 ,(2016) , 10.1007/S10570-016-1012-0
Shuhui Li, Jianying Huang, Zhong Chen, Guoqiang Chen, Yuekun Lai, A review on special wettability textiles: theoretical models, fabrication technologies and multifunctional applications Journal of Materials Chemistry. ,vol. 5, pp. 31- 55 ,(2017) , 10.1039/C6TA07984A