Smearing-type wear behavior of Al62Cu25.5Fe12.5 quasicrystal abrasive on soft metals
作者： Yongjun Chen , Jianbin Qiang , Chuang Dong
DOI: 10.1016/J.INTERMET.2015.09.001
关键词: Quasicrystal 、 Intermetallic 、 Austenite 、 Polishing 、 Materials science 、 Abrasive 、 Metallurgy 、 Surface finishing 、 Diamond
摘要: Abstract The abrasive polishing behavior of Al62Cu25.5Fe12.5 quasicrystal on Cu, Al and austenite stainless steel alloys were investigated, to compare with commonly used hard abrasives such as diamond, alumina silica. showed a dominating smearing-type wear mechanism, in sharp contrast all the other three abrasives, reflected by large indent size shrinking respect surface removal depth. polishing, producing flattened minor depth removal, may open new application fields where low-wearing fine finishing are demanded.
sci-hub.se 参考文章(25)
Handbook of Advanced Ceramics Machining CRC Press. ,(2006) , 10.1201/9781420005547
Leonard Ernest Samuels, Metallographic polishing by mechanical methods ,(1982)
U Köster, W Liu, H Liebertz, M Michel, Mechanical properties of quasicrystalline and crystalline phases in AlCuFe alloys Journal of Non-crystalline Solids. ,vol. 153, pp. 446- 452 ,(1993) , 10.1016/0022-3093(93)90393-C
Fang Liang, Kong Xianglong, Zhou Qingde, A wear tester capable of monitoring and evaluating the movement pattern of abrasive particles in three-body abrasion Wear. ,vol. 159, pp. 115- 120 ,(1992) , 10.1016/0043-1648(92)90292-G
C. J. Jenks, P. A. Thiel, Quasicrystals : A short review from a surface science perspective Langmuir. ,vol. 14, pp. 1392- 1397 ,(1998) , 10.1021/LA970727+
Liang Fang, Yimin Gao, Songhua Si, Qingde Zhou, Effect of lubricants on the friction and wear of Al2O3 against gray cast iron Wear. ,vol. 210, pp. 145- 150 ,(1997) , 10.1016/S0043-1648(97)00042-2
Yongsong Xie, Bharat Bhushan, Effects of particle size, polishing pad and contact pressure in free abrasive polishing Wear. ,vol. 200, pp. 281- 295 ,(1996) , 10.1016/S0043-1648(96)07275-4
L. Fang, X.L. Kong, J.Y. Su, Q.D. Zhou, Movement patterns of abrasive particles in three-body abrasion Wear. pp. 782- 789 ,(1993) , 10.1016/0043-1648(93)90079-2
Jed S. Lyons, Thomas L. Starr, Strength and Toughness of Slip‐Cast Fused‐Silica Composites Journal of the American Ceramic Society. ,vol. 77, pp. 1673- 1675 ,(1994) , 10.1111/J.1151-2916.1994.TB09776.X
K. Tanaka, Y. Mitara, M. Koiwa, Elastic constants of Al-based icosahedral quasicrystals Philosophical Magazine A. ,vol. 73, pp. 1715- 1723 ,(1996) , 10.1080/01418619608243008