Active intelligent termination
作者： David K. Okura
DOI:
关键词: Mode (computer interface) 、 Logic level 、 Three-state logic 、 Voltage 、 System bus 、 Ground plane 、 Electronic engineering 、 Field-effect transistor 、 Engineering 、 Electrical engineering
摘要: An active intelligent termination circuit is designed to function as a self-switching clamp adapted attenuate unwanted signals on data bus. A field effect transistor switched or off in conducting mode non-conducting respectively accordance with the transmitted Any low level which may appear bus when having voltage corresponding logic zero present will be attenuated by coupled both and ground plane. The switches one
lens.org 参考文章(13)
W. Alan Schuppan, Walter L. Gregory, Three state differential ECL bus driver ,(1984)
Narasipur G. Anantha, Robert A. Henle, James L. Walsh, Integrated circuit interconnection structure having precision terminating resistors ,(1977)
Thomas T. Davis, Active termination for a transmission line ,(1979)
Alexander Stewart, Active termination circuit for computer interface use ,(1986)
Richard C. Warner, Level clamp for Tri-state CMOS bus structure ,(1987)
Richard W. Sieber, Michael Cooperman, Bidirectional digital signal transmission system ,(1988)
Hiroto Kawagoe, Pulse level correcting circuit ,(1973)
Harold H. Muller, Larry W. DeClue, Active termination network for clamping a line signal ,(1974)
Tetsu Tanizawa, Semiconductor large scale integrated circuit with noise cut circuit ,(1987)
Jr. William S. Harris, Adaptable nonlinear transmission line terminator ,(1980)