作者: P. Arribas , M. Khayet , M.C. García-Payo , L. Gil
DOI: 10.1016/J.SEPPUR.2014.10.010
关键词: Interfacial polymerization 、 Polymer chemistry 、 Microfiltration 、 Surface modification 、 Polysulfone 、 Chemical engineering 、 Composite number 、 Contact angle 、 Attenuated total reflection 、 Membrane 、 Materials science
摘要: Abstract Polysulfone electro-spun nano-fibrous membranes (PSU ENMs) were prepared using a mixture of solvents N , -dimethyl formamide (DMF) and tetrahydrofurane (THF) for microfiltration ultrafiltration. The involved electro-spinning parameters, namely, the polymer solution flow rate, electric voltage distance between needle tip collector varied in range within which it was possible to obtain bead-free PSU ENMs. Their effects on morphology structure ENMs studied. Interfacial polymerization technique applied develop novel thin-film composite polyester-PSU based characterized by means different techniques such as scanning electron microscopy, contact angle measurements, X-ray diffraction, attenuated total reflectance Fourier transform spectroscopy. Micro/ultra-filtration tests conducted humic acid model solutions with concentration 15 mg/L at two pH values (3 11). It observed that not selective under acidic conditions, whereas achieved better separation factors lower irreversible fouling than those un-modified