Effects of particle size of reactant on characteristics of combustion synthesis of TiC-Fe cermet

作者: Quncheng Fan , Huifen Chai , Zhihao Jin

DOI: 10.1023/A:1015313215455

关键词: Materials sciencePowder metallurgyParticle sizeChemical engineeringMetallurgyReaction velocityMolar ratioCombustionCermetPhase (matter)Titanium carbide

摘要: Four Ti-C-Fe powder mixtures, with a same molar ratio but different particle size, were used for combustion synthesis of TiC-Fe cermet to investigate effects the size on characteristics synthesis. The results showed that mixture finer Ti gave out higher temperature, reaction velocity, product density, layer-shaped pore, and greater TiC particles whether Fe was or coarser. While in case coarser used, small amount residual phase remained product, what is more interesting lower velocity than by powder. These successfully explained previously proposed mechanisms TiC-Fe, proved be valid thereby.

参考文章(7)
QUNCHENG FAN, HUIFEN CHAI, ZHIHAO JIN, Role of iron addition in the combustion synthesis of TiC-Fe cermet Journal of Materials Science. ,vol. 32, pp. 4319- 4323 ,(1997) , 10.1023/A:1018667722150
Quncheng Fan, Huifen Chai, Zhihao Jin, Dual-solution-precipitation mechanism of combustion synthesis of TiC-Fe cermet with fine Ti powder Journal of Materials Science. ,vol. 36, pp. 5559- 5563 ,(2001) , 10.1023/A:1012597111988
M. J. Capaldi, A. Saidi, J. V. Wood, Reaction Synthesis of TiC and Fe-TiC Composites* Isij International. ,vol. 37, pp. 188- 193 ,(1997) , 10.2355/ISIJINTERNATIONAL.37.188
A. Saidi, A. Chrysanthou, J. V. Wood, J. L. F. Kellie, Characteristics of the combustion synthesis of TiC and Fe-TiC composites Journal of Materials Science. ,vol. 29, pp. 4993- 4998 ,(1994) , 10.1007/BF01151089
Quncheng Fan, Huifen Chai, Zhihao Jin, Microstructural evolution of the titanium particles in the in-situ composition of TiC–Fe by the combustion synthesis Journal of Materials Processing Technology. ,vol. 96, pp. 102- 107 ,(1999) , 10.1016/S0924-0136(99)00278-2
J. B. Holt, Z. A. Munir, Combustion synthesis of titanium carbide: Theory and experiment Journal of Materials Science. ,vol. 21, pp. 251- 259 ,(1986) , 10.1007/BF01144729
C.R. Bowen, B. Derby, Finite-difference modelling of self-propagating high-temperature synthesis of materials Acta Metallurgica et Materialia. ,vol. 43, pp. 3903- 3913 ,(1995) , 10.1016/0956-7151(95)90173-6