Filler‐polymer interactions of styrene and butadiene units in silica‐filled styrene–butadiene rubber compounds
作者： Sung-Seen Choi , Ik-Sik Kim , Seung Goo Lee , Chang Whan Joo
DOI: 10.1002/POLB.10689
关键词: Styrene 、 Materials science 、 Copolymer 、 Styrene-butadiene 、 Silane 、 Filler (materials) 、 Polymer 、 Natural rubber 、 Polymer chemistry 、 Microstructure
摘要: Styrene–butadiene rubber (SBR) is a copolymer of styrene and butadiene, the butadiene unit composed cis-1,4-, trans-1,4-, 1,2-components. Filler-polymer interactions each component SBR in silica-filled compounds were examined by microstructure analysis bound unbound rubbers. The composition ratio units (butadiene/styrene) was higher than that compounded rubber. Of units, 1,2-component more abundant cis-1,4- trans-1,4-components. filler-polymer interaction with silica stronger unit, as compared others. butadiene–styrene containing silane coupling agent lower for without silane. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Phys 42: 577–584,
harvard.edu
sci-hub.se 参考文章(26)
G. Kraus, Reinforcement of elastomers by carbon black Advances in Polymer Science. ,vol. 60, pp. 155- 237 ,(1971) , 10.1007/3-540-05483-9_12
M. H. S. Gradwell, W. J. McGill, Sulfur vulcanization of polyisoprene accelerated by benzothiazole derivatives. IV. The reaction of polyisoprene with N-cyclohexylbenzothiazole sulfenamide, sulfur, and zinc oxide Journal of Applied Polymer Science. ,vol. 61, pp. 1515- 1523 ,(1996) , 10.1002/(SICI)1097-4628(19960829)61:9<1515::AID-APP11>3.0.CO;2-P
Sung-Seen Choi, Correlation of crosslink density with pyrolysis pattern of natural rubber vulcanizates with efficient vulcanizing cure system Journal of Analytical and Applied Pyrolysis. ,vol. 52, pp. 105- 112 ,(1999) , 10.1016/S0165-2370(99)00041-8
M. H. S. Gradwell, W. J. McGill, Sulfur vulcanization of polyisoprene accelerated by benzothiazole derivatives. III. The reaction of 2‐bisbenzothiazole‐2,2′‐disulfide with sulfur and ZnO in polyisoprene Journal of Applied Polymer Science. ,vol. 61, pp. 1131- 1136 ,(1996) , 10.1002/(SICI)1097-4628(19960815)61:7<1131::AID-APP9>3.0.CO;2-N
Hajime Serizawa, Takehusa Nakamura, Masayoshi Ito, Koji Tanaka, Akimasa Nomura, Effects of Oxidation of Carbon Black Surface on the Properties of Carbon Black–Natural Rubber Systems Polymer Journal. ,vol. 15, pp. 201- 206 ,(1983) , 10.1295/POLYMJ.15.201
P. Bradna, J. Zima, The use of pyrolysis—gas chromatography / mass spectroscopy in the analysis of cured polyfunctional epoxy resins Journal of Analytical and Applied Pyrolysis. ,vol. 21, pp. 207- 220 ,(1991) , 10.1016/0165-2370(91)80026-5
Hajime Ohtani, Shohji Ueda, Yasuhisa Tsukahara, Chuichi Watanabe, Shin Tsuge, Pyrolysis-gas chromatography for end group analysis of polystyrene macromonomers using stepwise pyrolysis combined with on-line methylation Journal of Analytical and Applied Pyrolysis. ,vol. 25, pp. 1- 10 ,(1993) , 10.1016/0165-2370(93)80028-X
M. H. S. Gradwell, W. J. Mcgill, The thermal decomposition of sulfenamide accelerators Journal of Applied Polymer Science. ,vol. 51, pp. 169- 176 ,(1994) , 10.1002/APP.1994.070510117
Siegfried Wolff, Meng-Jiao Wang, Filler—Elastomer Interactions. Part IV. The Effect of the Surface Energies of Fillers on Elastomer Reinforcement Rubber Chemistry and Technology. ,vol. 65, pp. 329- 342 ,(1992) , 10.5254/1.3538615
C.M Blow, Polymer/particulate filler interaction—the bound rubber phenomena Polymer. ,vol. 14, pp. 309- 323 ,(1973) , 10.1016/0032-3861(73)90124-9