A Fem Analysis to Determine Effect of Milling Parameters on Plastic Strain and Plastic Strain‐Rate Distribution When Milling Hastelloy C‐22HS
作者： K. Kadirgama , K.A. Abou‐El‐Hossein , B. Mohammad , H. Habeeb
DOI: 10.1163/157361107781389580
关键词: Composite material 、 Strain distribution 、 Coulomb friction 、 Finite element method 、 Contour line 、 Metal cutting 、 Plasticity 、 Distribution (mathematics) 、 Materials science
摘要: The Finite Element Method and Response Surface are used to find the effect of milling parameters (Cutting speed, Feedrate Axial depth) on plastic strain when Hastelloy C‐22HS. This simulation gain more understanding distribution in metal cutting. surface method (RSM) has been minimize number simulation. contour plot from RSM shows relationship between variables (cutting feedrate axial response (plastic ‐ rate).The friction interaction along tool‐chip interface is modeled with Coulomb law.
emeraldinsight.com参考文章(9)
G. E. P. Box, D. W. Behnken, Some New Three Level Designs for the Study of Quantitative Variables Technometrics. ,vol. 2, pp. 455- 475 ,(1960) , 10.1080/00401706.1960.10489912
M A El Baradie, Surface Roughness Model for Turning Grey Cast Iron (154 BHN) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ,vol. 207, pp. 43- 54 ,(1993) , 10.1243/PIME_PROC_1993_207_060_02
, P. L. B. Oxley, A. G. Humphreys, A. Larizadeh, The Influence of Rate of Strain-Hardening in Machining: Proceedings of the Institution of Mechanical Engineers. ,vol. 175, pp. 881- 891 ,(1961) , 10.1243/PIME_PROC_1961_175_057_02
M. Eugene Merchant, Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip Journal of Applied Physics. ,vol. 16, pp. 267- 275 ,(1945) , 10.1063/1.1707586
Väinö Piispanen, Theory of Formation of Metal Chips Journal of Applied Physics. ,vol. 19, pp. 876- 881 ,(1948) , 10.1063/1.1697893
A. Mishra, T. Prasad, Residual stresses due to a moving heat source International Journal of Mechanical Sciences. ,vol. 27, pp. 571- 581 ,(1985) , 10.1016/0020-7403(85)90073-6
M. Alauddin, M.A. Mazid, M.A. El Baradi, M.S.J. Hashmi, Cutting forces in the end milling of Inconel 718 Journal of Materials Processing Technology. ,vol. 77, pp. 153- 159 ,(1998) , 10.1016/S0924-0136(97)00412-3
W. B. Palmer, P. L. B. Oxley, Mechanics of Orthogonal Machining Proceedings of the Institution of Mechanical Engineers. ,vol. 173, pp. 623- 654 ,(1959) , 10.1243/PIME_PROC_1959_173_053_02
Frictional interactions between chip and rake face in continuous chip formation Proc. R. Soc. Lond. A. ,vol. 366, pp. 173- 183 ,(1979) , 10.1098/RSPA.1979.0046