Experimental simulation of high temperature sliding contact of hot rolled steel
作者： H. Torres , M. Varga , F. Widder , U. Cihak-Bayr , O. Viskovic
DOI: 10.1016/J.TRIBOINT.2015.01.007
关键词: Sheet metal 、 Abrasion (geology) 、 Mixed layer 、 Microstructure 、 Composite material 、 Material selection 、 Metallurgy 、 Sliding contact 、 Hot rolled 、 Materials science 、 Sliding wear
摘要: Abstract Wear plates are used for the alignment of sheet metal during hot rolling steel. Conditions found process, such as high temperature contact with and sliding speeds responsible severe plate wear. Damage characterisation worn showed in particular onset microstructure changes beneath wear grooves formation a mechanically mixed layer region.The aim this work is development material selection map cost-efficient steel grades by means new testing. As result, significant differences behaviour were between investigated classes.
elsevier.com
sci-hub.se 参考文章(32)
M J Neale, M G Gee, Guide to wear problems and testing for industry ,(2012)
A.R. Riahi, A.T. Alpas, Wear map for grey cast iron Wear. ,vol. 255, pp. 401- 409 ,(2003) , 10.1016/S0043-1648(03)00100-5
S.C Lim, The relevance of wear-mechanism maps to mild-oxidational wear Tribology International. ,vol. 35, pp. 717- 723 ,(2002) , 10.1016/S0301-679X(02)00033-6
F.H. Stott, The role of oxidation in the wear of alloys Tribology International. ,vol. 31, pp. 61- 71 ,(1998) , 10.1016/S0301-679X(98)00008-5
G. Straffelini, M. Pellizzari, L. Maines, Effect of sliding speed and contact pressure on the oxidative wear of austempered ductile iron Wear. ,vol. 270, pp. 714- 719 ,(2011) , 10.1016/J.WEAR.2011.02.004
R. Polak, S. Ilo, E. Badisch, Relation Between Inter-Particle Distance (LIPD) and Abrasion in Multiphase Matrix–Carbide Materials Tribology Letters. ,vol. 33, pp. 29- 35 ,(2009) , 10.1007/S11249-008-9388-0
H.R. Manohara, T.M. Chandrashekharaiah, K. Venkateswarlu, S.A. Kori, Dry sliding wear response of A413 alloy: Influence of intermetallics and test parameters Tribology International. ,vol. 51, pp. 54- 60 ,(2012) , 10.1016/J.TRIBOINT.2012.02.023
Hans Berns, Microstructural properties of wear-resistant alloys Wear. pp. 271- 279 ,(1995) , 10.1016/0043-1648(95)90034-9
Joseph F. Haberer, Jeff Gates, Robin Fifield, Resistance to Abrasive Wear and Metallurgical Property Assessment of Nine Casing-Friendly Hard-Banding Alloy Chemistries: Abrasion Resistance Assessment Using ASTM G65 Methodology (Standard Test Method for Measuring Abrasion with Dry Sand/Rubber Wheel Apparatus) Society of Petroleum Engineers - IADC/SPE Asia Pacific Drilling Technology Conference 2014: Driving Sustainable Growth Through Technology and Innovation. pp. 482- 514 ,(2014) , 10.2118/170520-MS
S Yu Tarassov, AV Kolubaev, None, Effect of friction on subsurface layer microstructure in austenitic and martensitic steels Wear. ,vol. 231, pp. 228- 234 ,(1999) , 10.1016/S0043-1648(99)00107-6