Pit growth in a Ni–Nb metallic glass compared with its crystalline counterpart
作者： Z.M. Wang , J. Zhang , J.Q. Wang
DOI: 10.1016/J.INTERMET.2010.06.010
关键词: Materials science 、 Amorphous solid 、 Dissolution 、 Pitting corrosion 、 Metallurgy 、 Electrochemistry 、 Metal 、 Corrosion 、 Crevice corrosion 、 Amorphous metal
摘要: The growth and repassivation behavior of metastable pits in a Ni(50)Nb(50) metallic glass, as well its crystalline counterpart, were investigated by statistical analysis on the current transients potentio-static measurements results show that amorphous sample demonstrates higher transient current, shorter pit times than crystallized Comparisons rates charges passed during pitting reveal alloy grow faster but with smaller final volumes. Iris suggested structure can induce rapid dissolution thus promote accumulation passivating elements (Nb), resulting rate A notable effect early is determined. (C) 2010 Elsevier Ltd All rights reserved
irgrid.ac.cn
elsevier.com参考文章(30)
J.C. Farmer, J.J. Haslam, S.D. Day, T. Lian, C.K. Saw, P.D. Hailey, J-S. Choi, R.B. Rebak, N. Yang, J.H. Payer, J.H. Perepezko, K. Hildal, E.J. Lavernia, L. Ajdelsztajn, D.J. Branagan, E.J. Buffa, L.F. Aprigliano, Corrosion resistance of thermally sprayed high-boron iron-based amorphous-metal coatings: Fe 49.7 Cr 17.7 Mn 1.9 Mo 7.4 W 1.6 B 15.2 C 3.8 Si 2.4 Journal of Materials Research. ,vol. 22, pp. 2297- 2311 ,(2007) , 10.1557/JMR.2007.0291
JE Sweitzer, JR Scully, RA Bley, JWP Hsu, Nanocrystalline Al87Ni8.7Y4.3 and Al90Fe5Gd5 alloys that retain the localized corrosion resistance of the amorphous state Electrochemical and Solid State Letters. ,vol. 2, pp. 267- 270 ,(1999) , 10.1149/1.1390807
GT Burstein, C Liu, RM Souto, SP Vines, None, Origins of pitting corrosion Corrosion Engineering Science and Technology. ,vol. 39, pp. 25- 30 ,(2004) , 10.1179/147842204225016859
K. Hashimoto, K. Asami, A. Kawashima, H. Habazaki, E. Akiyama, The role of corrosion-resistant alloying elements in passivity Corrosion Science. ,vol. 49, pp. 42- 52 ,(2007) , 10.1016/J.CORSCI.2006.05.003
S.J Pang, T Zhang, K Asami, A Inoue, Synthesis of Fe–Cr–Mo–C–B–P bulk metallic glasses with high corrosion resistance Acta Materialia. ,vol. 50, pp. 489- 497 ,(2002) , 10.1016/S1359-6454(01)00366-4
J.W. Schultze, M.M. Lohrengel, Stability, reactivity and breakdown of passive films. Problems of recent and future research Electrochimica Acta. ,vol. 45, pp. 2499- 2513 ,(2000) , 10.1016/S0013-4686(00)00347-9
K. E. Heusler, D. Huerta, Kinetics and Mechanisms of the Anodic Dissolution of Metallic Glasses Journal of The Electrochemical Society. ,vol. 136, pp. 65- 71 ,(1989) , 10.1149/1.2096615
E. Fleury, J. Jayaraj, Y.C. Kim, H.K. Seok, K.Y. Kim, K.B. Kim, Fe-based amorphous alloys as bipolar plates for PEM fuel cell Journal of Power Sources. ,vol. 159, pp. 34- 37 ,(2006) , 10.1016/J.JPOWSOUR.2006.04.119
Shujie Pang, Tao Zhang, Katsuhiko Asami, Akihisa Inoue, Formation of Bulk Glassy Ni-(Co-)Nb-Ti-Zr Alloys with High Corrosion Resistance Materials Transactions. ,vol. 43, pp. 1771- 1773 ,(2002) , 10.2320/MATERTRANS.43.1771
W.H Peter, R.A Buchanan, C.T Liu, P.K Liaw, M.L Morrison, J.A Horton, C.A Carmichael, J.L Wright, Localized corrosion behavior of a zirconium-based bulk metallic glass relative to its crystalline state Intermetallics. ,vol. 10, pp. 1157- 1162 ,(2002) , 10.1016/S0966-9795(02)00130-9