Progressive failure analysis on scaled open-hole tensile composite laminates
作者： Hongchen Bao , Guangyan Liu
DOI: 10.1016/J.COMPSTRUCT.2016.05.017
关键词: Delamination 、 Fiber 、 Numerical analysis 、 Materials science 、 Composite laminates 、 Composite material 、 Stress concentration 、 Ultimate tensile strength 、 Structural engineering 、 Tension (physics) 、 Edge (geometry)
摘要: Abstract Despite the rapid advances of numerical methods and theoretical models for progressive failure analysis composites, it’s still a challenge to predict strength damage progression composite laminates under open-hole tension (OHT). One main obstacles is capture true stress concentration at hole edge. It has been found that formation longitudinal splitting early loading stage alleviates extremely high concentration. The purpose this study develop an efficient model, employing surface-based cohesive contacts delamination, thickness size effect sublaminate scaled ply-level OHT. by using aligned mesh with fiber direction each ply, good correlation experimental results can be achieved both strengths modes laminates.
sci-hub.se 参考文章(32)
Junling Hou, Qun Li, Guangyan Liu, Hong Zuo, Fundamental solutions of a crack impinging upon an interface slippage in laminated anisotropic bodies Archive of Applied Mechanics. ,vol. 86, pp. 687- 700 ,(2016) , 10.1007/S00419-015-1055-Y
A. Arteiro, G. Catalanotti, J. Xavier, P.P. Camanho, Notched response of non-crimp fabric thin-ply laminates Composites Science and Technology. ,vol. 79, pp. 97- 114 ,(2013) , 10.1016/J.COMPSCITECH.2013.02.001
G.H. Erçin, P.P. Camanho, J. Xavier, G. Catalanotti, S. Mahdi, P. Linde, Size effects on the tensile and compressive failure of notched composite laminates Composite Structures. ,vol. 96, pp. 736- 744 ,(2013) , 10.1016/J.COMPSTRUCT.2012.10.004
D. Mollenhauer, E.V. Iarve, R. Kim, Theoretical and experimental investigation of stress redistribution in open hole composite laminates due to damage accumulation Composites Part A-applied Science and Manufacturing. ,vol. 36, pp. 163- 171 ,(2005) , 10.1016/J.COMPOSITESA.2004.06.011
B.Y. Chen, T.E. Tay, P.M. Baiz, S.T. Pinho, Numerical analysis of size effects on open-hole tensile composite laminates Composites Part A-applied Science and Manufacturing. ,vol. 47, pp. 52- 62 ,(2013) , 10.1016/J.COMPOSITESA.2012.12.001
P. Maimí, P.P. Camanho, J.A. Mayugo, C.G. Dávila, A continuum damage model for composite laminates: Part I – Constitutive model Mechanics of Materials. ,vol. 39, pp. 897- 908 ,(2007) , 10.1016/J.MECHMAT.2007.03.005
J.M. Whitney, R.J. Nuismer, Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations Journal of Composite Materials. ,vol. 8, pp. 253- 265 ,(1974) , 10.1177/002199837400800303
Stephen R. Hallett, Michael R. Wisnom, Xiangqian Li, Numerical investigation of progressive damage and the effect of layup in overheight compact tension tests Composites Part A-applied Science and Manufacturing. ,vol. 43, pp. 2137- 2150 ,(2012) , 10.1016/J.COMPOSITESA.2012.03.002
P. P. Camanho, F. L. Matthews, A progressive Damage Model for Mechanically Fastened Joints in Composite Laminates Journal of Composite Materials. ,vol. 33, pp. 2248- 2280 ,(1999) , 10.1177/002199839903302402
S.R. Hallett, B.G. Green, W.G. Jiang, M.R. Wisnom, An experimental and numerical investigation into the damage mechanisms in notched composites Composites Part A-applied Science and Manufacturing. ,vol. 40, pp. 613- 624 ,(2009) , 10.1016/J.COMPOSITESA.2009.02.021