Influence of sand on the mechanical properties of metakaolin geopolymers
作者： C. Kuenzel , L. Li , L. Vandeperre , A.R. Boccaccini , C.R. Cheeseman
DOI: 10.1016/J.CONBUILDMAT.2014.05.058
关键词: Composite material 、 Materials science 、 Geopolymer 、 Shrinkage 、 Water content 、 Rheology 、 Metakaolin 、 Cracking 、 Viscosity 、 Mortar
摘要: Abstract Metakaolin geopolymers require a high water content to have appropriate rheology for use in some applications and these mixes exhibit extensive drying shrinkage cracking. This work aimed understand the effect of adding sand as inert filler metakaolin geopolymers. It is found that viscosity increases with addition mortars become unworkable when more than 40 vol% added. Linear was reduced from about 8% absence less 1% 38 vol% addition. Moreover, geopolymer containing 15 vol% can withstand at 110 °C without Because reduction it possible formulate flow but do not crack on materials potential range architectural restoration applications.
elsevier.com
sci-hub.se 参考文章(39)
H RAHIER, W SIMONS, B VAN MELE, M BIESEMANS, Low-temperature synthesized aluminosilicate glasses. Part III Influence of the composition of the silicate solution on production, structure and properties Journal of Materials Science. ,vol. 32, pp. 2237- 2247 ,(1997) , 10.1023/A:1018563914630
H. Rahier, B. Van Mele, M. Biesemans, J. Wastiels, X. Wu, Low-temperature synthesized aluminosilicate glasses Journal of Materials Science. ,vol. 31, pp. 71- 79 ,(1996) , 10.1007/BF00355128
D. S. Perera, O. Uchida, E. R. Vance, K. S. Finnie, Influence of curing schedule on the integrity of geopolymers Journal of Materials Science. ,vol. 42, pp. 3099- 3106 ,(2007) , 10.1007/S10853-006-0533-6
B. A. Latella, D. S. Perera, D. Durce, E. G. Mehrtens, J. Davis, Mechanical properties of metakaolin-based geopolymers with molar ratios of Si/Al ≈ 2 and Na/Al ≈ 1 Journal of Materials Science. ,vol. 43, pp. 2693- 2699 ,(2008) , 10.1007/S10853-007-2412-1
Z ZUHUA, Y XIAO, Z HUAJUN, C YUE, Role of water in the synthesis of calcined kaolin-based geopolymer Applied Clay Science. ,vol. 43, pp. 218- 223 ,(2009) , 10.1016/J.CLAY.2008.09.003
Alberto Sepulcre-Aguilar, Francisco Hernández-Olivares, Assessment of phase formation in lime-based mortars with added metakaolin, Portland cement and sepiolite, for grouting of historic masonry Cement and Concrete Research. ,vol. 40, pp. 66- 76 ,(2010) , 10.1016/J.CEMCONRES.2009.08.028
Kostas Komnitsas, Dimitra Zaharaki, Geopolymerisation: A review and prospects for the minerals industry Minerals Engineering. ,vol. 20, pp. 1261- 1277 ,(2007) , 10.1016/J.MINENG.2007.07.011
Z. Aly, E.R. Vance, D.S. Perera, J.V. Hanna, C.S. Griffith, J. Davis, D. Durce, Aqueous leachability of metakaolin-based geopolymers with molar ratios of Si/Al = 1.5 4 Journal of Nuclear Materials. ,vol. 378, pp. 172- 179 ,(2008) , 10.1016/J.JNUCMAT.2008.06.015
Rafat Siddique, Juvas Klaus, Influence of metakaolin on the properties of mortar and concrete: A review Applied Clay Science. ,vol. 43, pp. 392- 400 ,(2009) , 10.1016/J.CLAY.2008.11.007
J.P. Castro-Gomes, Abílio P. Silva, Rafael P. Cano, J. Durán Suarez, A. Albuquerque, Potential for reuse of tungsten mining waste-rock in technical-artistic value added products Journal of Cleaner Production. ,vol. 25, pp. 34- 41 ,(2012) , 10.1016/J.JCLEPRO.2011.11.064