Arc fault detection and confirmation using voltage and current analysis
作者： Prashant K. Prabhu , Vijay V. Deshpande
DOI:
关键词: Signal 、 Arc-fault circuit interrupter 、 Acoustics 、 Alternating current 、 Phase plane 、 Electrical engineering 、 Electrical network 、 Voltage 、 Plot (graphics) 、 Engineering 、 Arc (geometry)
摘要: An arc fault in an electrical circuit is detected by recording phase plane plot data of current versus voltage for at least one cycle alternating signal, and applying a monitoring algorithm to the determine whether present. detection confirmation are employed detect confirm presence series parallel faults circuit.
lens.org参考文章(58)
Frederick K. Blades, Method and apparatus for detecting arcing in ac power systems by monitoring high frequency noise ,(1996)
Mieczyslaw Bandura, Anthony-Cernan Mendoza, James Funke, Dalibor Kladar, Mahoud Ghanem, Chi Thuong Ha, Surge protection device including a thermal fuse spring, a fuse trace and a voltage clamping device ,(2001)
Gary W. Scott, Zone arc fault detection ,(1999)
Raymond Warren Mackenzie, Stephen Albert Mrenna, David M. Wood, Circuit breaker using bimetal of thermal-magnetic trip to sense current ,(1995)
John Anthony Wafer, Raymond Warren Mackenzie, Self testing circuit breaker ground fault and sputtering arc trip unit ,(1994)
Steven Christopher Schmalz, Joseph Charles Zuercher, Arc fault detector immune to dimmer transients and a circuit breaker incorporating the same ,(2002)
Bruce F. MacBeth, Thomas N. Packard, Combination ground fault and arc fault circuit interrupter ,(1998)
Robert T. Elms, Clive W. Kimblin, Circuit interrupter with test actuator for ground fault and arc fault test mechanisms ,(1999)
Brian G. Grattan, Andy A. Haun, Robert F. Dvorak, Kon B. Wong, Gary W. Scott, Blocking/inhibiting operation in an arc fault detection system ,(1999)