Optimum design of composite structures with ply drop using genetic algorithm and expert system shell
作者： Jung-Seok Kim , Chun-Gon Kim , Chang-Sun Hong
DOI: 10.1016/S0263-8223(99)00052-5
关键词: Composite material 、 Drop (liquid) 、 Finite element method 、 Expert system 、 Computer Aided Design 、 Composite number 、 Composite laminates 、 Numerical analysis 、 Structural engineering 、 Stacking 、 Engineering
摘要: … new optimization method (patchwise layup design method) for the weight optimization of composite … sequences in each patch were adjusted to meet the design requirement. Therefore, …
elsevier.com
sci-hub.se 参考文章(13)
John C. Fish, Sung W. Lee, Delamination of tapered composite structures Engineering Fracture Mechanics. ,vol. 34, pp. 43- 54 ,(1989) , 10.1016/0013-7944(89)90241-5
A. Mukherjee, B. Varughese, A PLY DROP-OFF ELEMENT FOR INCLUSION OF DROP-OFF IN THE GLOBAL ANALYSIS OF LAYERED COMPOSITE STRUCTURES Computers & Structures. ,vol. 54, pp. 865- 870 ,(1995) , 10.1016/0045-7949(94)00331-V
D.M. Thomas, J.P.H. Webber, A design study into the delamination behaviour of tapered composites Composite Structures. ,vol. 27, pp. 379- 388 ,(1994) , 10.1016/0263-8223(94)90264-X
James M. Curry, Eric R. Johnson, James H. Starnes, Effect of dropped plies on the strength of graphite-epoxy laminates AIAA Journal. ,vol. 30, pp. 449- 456 ,(1992) , 10.2514/3.10938
Jung-Seok Kim, Chun-Gon Kim, Chang-Sun Hong, Knowledge-Based Expert System for Optimal Stacking Sequence Design of Composite Structures Journal of Composite Materials. ,vol. 33, pp. 1244- 1274 ,(1999) , 10.1177/002199839903301305
Philippe M Manne, Stephen W Tsai, None, Design Optimization of Composite Plates: Part I—Design Criteria for Strength, Stiffness, and Manufacturing Complexity of Composite Laminates Journal of Composite Materials. ,vol. 32, pp. 544- 571 ,(1998) , 10.1177/002199839803200603
P.D. Mangalgiri, K. Vijayaraju, An analytical study on 090 ply-drops in composite laminates Composite Structures. ,vol. 28, pp. 181- 187 ,(1994) , 10.1016/0263-8223(94)90047-7
S. Morton, J. Weber, D. Thomas, Design and assessment of composite tapered laminated plates 35th Structures, Structural Dynamics, and Materials Conference. pp. 2763- 2773 ,(1994) , 10.2514/6.1994-1408
Byji Varughese, Abhijit Mukherjee, A ply drop-off element for analysis of tapered laminated composites Composite Structures. ,vol. 39, pp. 123- 144 ,(1997) , 10.1016/S0263-8223(97)00132-3
Philippe M Manne, Stephen W Tsai, None, Design Optimization of Composite Plates: Part II—Structural Optimization by Plydrop Tapering Journal of Composite Materials. ,vol. 32, pp. 572- 598 ,(1998) , 10.1177/002199839803200604