A modification of UniGrow 2‐parameter driving force model for short fatigue crack growth
作者： D.J. Bang , A. Ince , L.Q. Tang
DOI: 10.1111/FFE.12865
关键词: Paris' law 、 Composite material 、 Stress intensity factor 、 Fatigue testing 、 Materials science
摘要: … fatigue life with the presence of a short fatigue crack by incorporating short crack propagation into the UniGrow crack … the “short crack stress intensity correction method” and the “short …
sci-hub.se 参考文章(45)
Ming-Liang Zhu, Fu-Zhen Xuan, Shan-Tung Tu, Effect of load ratio on fatigue crack growth in the near-threshold regime: A literature review, and a combined crack closure and driving force approach Engineering Fracture Mechanics. ,vol. 141, pp. 57- 77 ,(2015) , 10.1016/J.ENGFRACMECH.2015.05.005
Newman, Wu, Swain, Zhao, Phillips, Ding, Small-crack growth and fatigue life predictions for high-strength aluminium alloys. Part II : Crack closure and fatigue analyses Fatigue & Fracture of Engineering Materials & Structures. ,vol. 23, pp. 59- 72 ,(2000) , 10.1046/J.1460-2695.2000.00242.X
Nenad Gubeljak, Mirco D. Chapetti, Jožef Predan, Bojan Senčič, Variation of Fatigue Threshold of Spring Steel with Pre-stressing Procedia Engineering. ,vol. 10, pp. 3339- 3344 ,(2011) , 10.1016/J.PROENG.2011.04.551
Mirco D. Chapetti, Leandro F. Jaureguizahar, Fatigue behavior prediction of welded joints by using an integrated fracture mechanics approach International Journal of Fatigue. ,vol. 43, pp. 43- 53 ,(2012) , 10.1016/J.IJFATIGUE.2012.02.004
C. Santus, D. Taylor, Physically short crack propagation in metals during high cycle fatigue International Journal of Fatigue. ,vol. 31, pp. 1356- 1365 ,(2009) , 10.1016/J.IJFATIGUE.2009.03.002
P. Lorenzino, A. Navarro, Growth of very long “short cracks” initiated at holes International Journal of Fatigue. ,vol. 71, pp. 64- 74 ,(2015) , 10.1016/J.IJFATIGUE.2014.03.023
A.A. Moftakhar, G. Glinka, Calculation of stress intensity factors by efficient integration of weight functions Engineering Fracture Mechanics. ,vol. 43, pp. 749- 756 ,(1992) , 10.1016/0013-7944(92)90005-Y
A NOROOZI, G GLINKA, S LAMBERT, A two parameter driving force for fatigue crack growth analysis International Journal of Fatigue. ,vol. 27, pp. 1277- 1296 ,(2005) , 10.1016/J.IJFATIGUE.2005.07.002
K. Hussain, SHORT FATIGUE CRACK BEHAVIOUR AND ANALYTICAL MODELS: A REVIEW Engineering Fracture Mechanics. ,vol. 58, pp. 327- 354 ,(1997) , 10.1016/S0013-7944(97)00102-1
U. Zerbst, M. Madia, H.Th. Beier, A model for fracture mechanics based prediction of the fatigue strength: Further validation and limitations Engineering Fracture Mechanics. ,vol. 130, pp. 65- 74 ,(2014) , 10.1016/J.ENGFRACMECH.2013.12.005