Benchmark study of screen printable silver inks on a PPE based substrate
作者： Riikka Mikkonen , Matti Mantysalo
DOI: 10.23919/EMPC.2017.8346894
关键词: Surface finish 、 Printed electronics 、 Substrate (printing) 、 Adhesive 、 Surface roughness 、 Materials science 、 Sheet resistance 、 Paint adhesion testing 、 Adhesion 、 Composite material
摘要: In this study, two silver inks are screen printed and their performance on a PPE polymer compound is evaluated. Both physical chemical surface pre-treatments used to modify substrate roughness energy. Electrical of structures evaluated by sheet resistance measurements. addition, crosscut adhesion test evaluate mechanical patterns. Low resistances can be obtained with materials. However, there significant difference in level. By pre-treatments, level improved, tape ink removal decreased even from 15% 0%. These results indicate that may utilized production high quality electronics applications.
sci-hub.se 参考文章(8)
Eerik Halonen, Vesa Pynttäri, Juha Lilja, Hannu Sillanpää, Matti Mäntysalo, Jouko Heikkinen, Riku Mäkinen, Tero Kaija, Pekka Salonen, Environmental protection of inkjet-printed Ag conductors Microelectronic Engineering. ,vol. 88, pp. 2970- 2976 ,(2011) , 10.1016/J.MEE.2011.04.038
Teija Laine‐Ma, Pekka Ruuskanen, Satu Kortet, Mikko Karttunen, Electroless copper plating and surface characterization of thermoplastic PPO based printed circuit boards Circuit World. ,vol. 35, pp. 22- 30 ,(2009) , 10.1108/03056120911002389
Elisabetta Ranucci, �sa Sandgren, Natalia Andronova, Ann-Christine Albertsson, Improved polyimide/metal adhesion by chemical modification approaches Journal of Applied Polymer Science. ,vol. 82, pp. 1971- 1985 ,(2001) , 10.1002/APP.2043
Jason A. Paulsen, Michael Renn, Kurt Christenson, Richard Plourde, Printing conformal electronics on 3D structures with Aerosol Jet technology 2012 Future of Instrumentation International Workshop (FIIW) Proceedings. pp. 1- 4 ,(2012) , 10.1109/FIIW.2012.6378343
Toni Björninen, Sari Merilampi, Leena Ukkonen, Lauri Sydänheimo, Pekka Ruuskanen, The Effect of Fabrication Method on Passive UHF RFID Tag Performance International Journal of Antennas and Propagation. ,vol. 2009, pp. 1- 8 ,(2009) , 10.1155/2009/920947
Alenka Vesel, Miran Mozetič, Low-Pressure Plasma-Assisted Polymer Surface Modifications Printing on Polymers#R##N#Fundamentals and Applications. pp. 101- 121 ,(2016) , 10.1016/B978-0-323-37468-2.00007-5
Tiina Vuorinen, Juha Niittynen, Timo Kankkunen, Thomas M. Kraft, Matti Mäntysalo, Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate. Scientific Reports. ,vol. 6, pp. 35289- ,(2016) , 10.1038/SREP35289
Tiina Vuorinen, Antti Vehkaoja, Vala Jeyhani, Kai Noponen, Augustine Onubeze, Timo Kankkunen, Anna-Kaisa Puuronen, Sampo Nurmentaus, Preejith S. P., Jayaraj Joseph, Tapio Seppanen, Mohanasankar Sivaprakasam, Matti Mantysalo, Printed, skin-mounted hybrid system for ECG measurements 2016 6th Electronic System-Integration Technology Conference (ESTC). pp. 1- 6 ,(2016) , 10.1109/ESTC.2016.7764710