High-speed milling of titanium alloys using binderless CBN tools
作者： Z.G. Wang , Y.S. Wong , M. Rahman
DOI: 10.1016/J.IJMACHTOOLS.2004.06.021
关键词: Tool material 、 Titanium alloy 、 Attrition 、 Cutting force 、 Materials science 、 Metallurgy 、 Boron nitride
摘要: Abstract The performance of conventional tools is poor when used to machine titanium alloys. In this paper, a new tool material, which binderless cubic boron nitride (BCBN), for high-speed milling widely alloy Ti–6Al–4V. and the wear mechanism BCBN have been investigated slot in terms cutting forces, life mechanism. This type manifests longer at high speeds. Observations based on SEM EDX suggest that adhesion workpiece attrition are main mechanisms
core.ac.uk
elsevier.com
sci-hub.se 参考文章(17)
H. Sumiya, S. Uesaka, S. Satoh, Mechanical properties of high purity polycrystalline cBN synthesized by direct conversion sintering method Journal of Materials Science. ,vol. 35, pp. 1181- 1186 ,(2000) , 10.1023/A:1004780218732
R. H. Brown, E. J. A. Armarego, The Machining of Metals ,(1969)
E.O Ezugwu, J Bonney, Y Yamane, An overview of the machinability of aeroengine alloys Journal of Materials Processing Technology. ,vol. 134, pp. 233- 253 ,(2003) , 10.1016/S0924-0136(02)01042-7
S.K. Bhaumik, C. Divakar, A.K. Singh, Machining Ti6Al4V alloy with a wBN-cBN composite tool Materials & Design. ,vol. 16, pp. 221- 226 ,(1995) , 10.1016/0261-3069(95)00044-5
Herbert Schulz, Toshimichi Moriwaki, High-Speed Machining CIRP Annals. ,vol. 41, pp. 637- 643 ,(1992) , 10.1016/S0007-8506(07)63250-8
Z.G. Wang, M. Rahman, Y.S. Wong, Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys Wear. ,vol. 258, pp. 752- 758 ,(2005) , 10.1016/J.WEAR.2004.09.066
A R Machado, J Wallbank, Machining of Titanium and its Alloys—a Review: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ,vol. 204, pp. 53- 60 ,(1990) , 10.1243/PIME_PROC_1990_204_047_02
Z.A Zoya, R Krishnamurthy, The performance of CBN tools in the machining of titanium alloys Journal of Materials Processing Technology. ,vol. 100, pp. 80- 86 ,(2000) , 10.1016/S0924-0136(99)00464-1
E. Kuljanic, M. Fioretti, L. Beltrame, F. Miani, Milling Titanium Compressor Blades with PCD Cutter CIRP Annals. ,vol. 47, pp. 61- 64 ,(1998) , 10.1016/S0007-8506(07)62785-1
Milton C. Shaw, The size effect in metal cutting Sadhana. ,vol. 28, pp. 875- 896 ,(2003) , 10.1007/BF02703319