Method of manufacturing curved composite structural elements
作者： Andrew E. Modin , Todd A. Brown , Stephen Douglas Friddell , Christopher G. Harris
DOI:
关键词: Materials science 、 A fibers 、 Composite number 、 Structural element 、 Diagonal 、 Surface (mathematics) 、 Structural engineering 、 Orientation (geometry) 、 Substrate (printing) 、 Composite material 、 Flange
摘要: A method of manufacturing curved composite structural elements can include fabricating a web ply in flat curve over removable substrate and laying up the on surface tool. The also diagonal with fibers oriented at +/−45° from centerline surface. further cutting unidirectional tape into segments to form cross fiber orientation normal One or both edges plies may be folded one two sides tool flange surfaces. Additionally, cap laid surfaces using tape. element layup then inspected any excess material trimmed away.
lens.org 参考文章(70)
Bernd A. K. Messner, Tape laying head with curved tape laying capability and improved adaptive steering ,(1993)
Robert Graftiaux, Henri Nithart, Taping machine for hot taping an electrical conductor ,(1986)
Scott Holmes, Stanley A. Lawton, John M. Haake, Method for heating and controlling temperature of composite material during automated placement ,(2000)
E Hardesty, H Karlson, Composite-tape placement head ,(1971)
Ruth H. Pater, Tough, processable simultaneous semi-interpenetrating polyimides ,(1994)
Arthur August, John G. Huber, Gantry for use in the manufacture of laminar structures ,(1978)
Karthik Ramani, Alan K. Miller, Micha M. Gur, Apparatus for forming fiber composite materials ,(1988)
Wei-Pai Tang, Timothy F. Su, Head assignment modeling and simulation for a Multiple Head Tape Lamination Machine. ,(2006)
Max Krogager, Claes Rudqvist, Bjorn Weidmann, Mikael Petersson, Method for fabricating a curved beam from composite material ,(2005)
JN Dickson, Sherrill B Biggers, Design and Analysis of a Stiffened Composite Fuselage Panel ,(1980)