Study of Static Recrystallization Behavior of a Nitrogen-Alloyed Ultralow Carbon Austenitic Stainless Steel by Experiment and Simulation
作者： Xiaoya Yang , An He , Congfeng Wu , Shilei Li , Hailong Zhang
DOI: 10.1007/S11665-015-1705-9
关键词: Materials science 、 Recrystallization (metallurgy) 、 Grain size 、 Kinetics 、 Strain rate 、 Nitrogen 、 Metallurgy 、 Austenitic stainless steel 、 Magnesium alloy 、 Composite material 、 Finite element simulation
摘要: Static recrystallization (SRX) behavior of a nitrogen-alloyed ultralow carbon austenitic stainless steel was studied on Gleeble-1500D thermal-simulator by two-step hot compression tests. Deformation temperatures 1173-1473 K, deformation strains 0.051-0.105, strain rates 0.01-1 s−1, and inter-step times 1-100 s were selected as the conditions to investigate effects parameters SRX behavior. Besides, influences initial grain size studied. The results show that temperature have greater than rate size. Based true stress-true data obtained from experiments, kinetics equation determined. In addition, established introduced into finite element simulation software DEFORM-3D perform deformation. Furthermore, modified for improving accuracy simulation, verified.
springer.com
sci-hub.se 参考文章(43)
J.Z. Lu, K.Y. Luo, Y.K. Zhang, G.F. Sun, Y.Y. Gu, J.Z. Zhou, X.D. Ren, X.C. Zhang, L.F. Zhang, K.M. Chen, C.Y. Cui, Y.F. Jiang, A.X. Feng, L. Zhang, Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel Acta Materialia. ,vol. 58, pp. 5354- 5362 ,(2010) , 10.1016/J.ACTAMAT.2010.06.010
M Seyed Salehi, S Serajzadeh, None, Simulation of static recrystallization in non-isothermal annealing using a coupled cellular automata and finite element model Computational Materials Science. ,vol. 53, pp. 145- 152 ,(2012) , 10.1016/J.COMMATSCI.2011.09.026
Huajie Mao, Rui Zhang, Lin Hua, Fei Yin, Study of Static Recrystallization Behaviors of GCr15 Steel Under Two-Pass Hot Compression Deformation Journal of Materials Engineering and Performance. ,vol. 24, pp. 930- 935 ,(2015) , 10.1007/S11665-014-1264-5
A. Momeni, K. Dehghani, H. Keshmiri, G.R. Ebrahimi, Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 527, pp. 1605- 1611 ,(2010) , 10.1016/J.MSEA.2009.10.051
Masoud Mirzaee, Hamid Keshmiri, Golam Reza Ebrahimi, Amir Momeni, Dynamic recrystallization and precipitation in low carbon low alloy steel 26NiCrMoV 14-5 Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 551, pp. 25- 31 ,(2012) , 10.1016/J.MSEA.2012.04.063
H. Mirzadeh, A. Najafizadeh, Correlation between processing parameters and strain-induced martensitic transformation in cold worked AISI 301 stainless steel Materials Characterization. ,vol. 59, pp. 1650- 1654 ,(2008) , 10.1016/J.MATCHAR.2008.03.004
Saden H. Zahiri, Sang Min Byon, Sung-Il Kim, Youngseog Lee, Peter D. Hodgson, Static and Metadynamic Recrystallization of Interstitial Free Steels during Hot Deformation Isij International. ,vol. 44, pp. 1918- 1923 ,(2004) , 10.2355/ISIJINTERNATIONAL.44.1918
A. M. Elwazri, E. Essadiqi, S. Yue, Kinetics of Metadynamic Recrystallization in Microalloyed Hypereutectoid Steels Isij International. ,vol. 44, pp. 744- 752 ,(2004) , 10.2355/ISIJINTERNATIONAL.44.744
Miao Jin, Bo Lu, Xin-gang Liu, Huan Guo, Hai-peng Ji, Bao-feng Guo, Static Recrystallization Behavior of 316LN Austenitic Stainless Steel Journal of Iron and Steel Research International. ,vol. 20, pp. 67- 72 ,(2013) , 10.1016/S1006-706X(13)60198-3
Eduardo Dupin, Akira Yanagida, Jun Yanagimoto, Modeling Static and Dynamic Kinetics of Microstructure Evolution in Type 316 Stainless Steel steel research international. ,vol. 85, pp. 1099- 1108 ,(2014) , 10.1002/SRIN.201300173