Study of an Engineering Mixed Contact: Part I-Theoretical Analysis

作者: Yongbin Zhang

DOI: 10.3923/JAS.2007.1249.1259

关键词: Mechanical engineeringMaterials science

摘要:

参考文章(19)
H. Christensen, Stochastic Models for Hydrodynamic Lubrication of Rough Surfaces Proceedings of the Institution of Mechanical Engineers. ,vol. 184, pp. 1013- 1026 ,(1969) , 10.1243/PIME_PROC_1969_184_074_02
A. A. Lubrecht, W. E. Ten Napel, R. Bosma, The Influence of Longitudinal and Transverse Roughness on the Elastohydrodynamic Lubrication of Circular Contacts Journal of Tribology-transactions of The Asme. ,vol. 110, pp. 421- 426 ,(1988) , 10.1115/1.3261645
B. J. Tabor, Failure of Thin Film Lubrication—An Expedient for the Characterization of Lubricants Journal of Lubrication Technology. ,vol. 103, pp. 497- 501 ,(1981) , 10.1115/1.3251718
Yongbin Zhang, Keping Tang, Guoshen Lu, Model of Elastohydrodynamic Lubrication with Molecularly Thin Lubricating Films. Part I: Development of Analysis International Journal of Fluid Mechanics Research. ,vol. 30, pp. 542- 557 ,(2003) , 10.1615/INTERJFLUIDMECHRES.V30.I5.70
Nadir Patir, H. S. Cheng, Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces Journal of Lubrication Technology. ,vol. 101, pp. 220- 229 ,(1979) , 10.1115/1.3453329
Yuan-Zhong Hu, Dong Zhu, A Full Numerical Solution to the Mixed Lubrication in Point Contacts Journal of Tribology-transactions of The Asme. ,vol. 122, pp. 1- 9 ,(2000) , 10.1115/1.555322
A. Begelinger, A. W. J. de Gee, On the Mechanism of Lubricant Film Failure in Sliding Concentrated Steel Contacts Journal of Lubrication Technology. ,vol. 98, pp. 575- 579 ,(1976) , 10.1115/1.3452937
Y. Zhang, How does dry contact occur in elastohydrodynamic lubrication Industrial Lubrication and Tribology. ,vol. 57, pp. 176- 180 ,(2005) , 10.1108/00368790510614136
M. J. A. Holmes, H. P. Evans, T. G. Hughes, R. W. Snidle, Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method Part 2: Results Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. ,vol. 217, pp. 305- 322 ,(2003) , 10.1243/135065003768618650