Quasi-static axial compression of thin-walled circular aluminium tubes

作者: S.R. Guillow , G. Lu , R.H. Grzebieta

DOI: 10.1016/S0020-7403(01)00031-5

关键词: AluminiumEmpirical formulaThin walledUniaxial compressionTesting equipmentComposite materialAxial compressionMaterials scienceQuasistatic processStructural engineeringAxial symmetry

摘要: Abstract This paper presents further experimental investigations into axial compression of thin-walled circular tubes, a classical problem studied for several decades. A total 70 quasi-static tests were conducted on 6060 aluminium tubes in the T5, as-received condition. The range D/t considered was expanded over previous studies to D/t=10–450. Collapse modes observed L/D⩽10 and mode classification chart developed. average crush force, FAV, non-dimensionalised an empirical formula established as FAV/MP=72.3(D/t)0.32. It found that test results both axi-symmetric non-symmetric lie single curve. Comprehensive comparisons have been made between existing theories our FAV. has revealed some shortcomings, suggesting theoretical work may be required. ratio FMAX/FAV increased substantially with increase ratio. effect filling different density polyurethane foam also briefly examined.

参考文章(22)
C. L. Magee, P. H. Thornton, Design Considerations in Energy Absorption by Structural Collapse 1978 Automotive Engineering Congress and Exposition. ,(1978) , 10.4271/780434
P. H. Thornton, ENERGY ABSORPTION BY FOAM FILLED STRUCTURES 1980 Automotive Engineering Congress and Exposition. ,(1980) , 10.4271/800081
T.Y. Reddy, R.J. Wall, Axial compression of foam-filled thin-walled circular tubes International Journal of Impact Engineering. ,vol. 7, pp. 151- 166 ,(1988) , 10.1016/0734-743X(88)90023-1
T. Wierzbicki, S.U. Bhat, W. Abramowicz, D. Brodkin, Alexander revisited—A two folding elements model of progressive crushing of tubes International Journal of Solids and Structures. ,vol. 29, pp. 3269- 3288 ,(1992) , 10.1016/0020-7683(92)90040-Z
T. Wierzbicki, W. Abramowicz, On the Crushing Mechanics of Thin-Walled Structures Journal of Applied Mechanics. ,vol. 50, pp. 727- 734 ,(1983) , 10.1115/1.3167137
A.A. Singace, Axial crushing analysis of tubes deforming in the multi-lobe mode International Journal of Mechanical Sciences. ,vol. 41, pp. 865- 890 ,(1999) , 10.1016/S0020-7403(98)00052-6
A.A. Singace, H. Elsobky, T.Y. Reddy, On the Eccentricity Factor in the Progressive Crushing of Tubes International Journal of Solids and Structures. ,vol. 32, pp. 3589- 3602 ,(1995) , 10.1016/0020-7683(95)00020-B
N.K. Gupta, S.K. Gupta, Effect of annealing, size and cut-outs on axial collapse behaviour of circular tubes International Journal of Mechanical Sciences. ,vol. 35, pp. 597- 613 ,(1993) , 10.1016/0020-7403(93)90004-E
ALFRED PUGSLEY, THE LARGE-SCALE CRUMPLING OF THIN CYLINDRICAL COLUMNS Quarterly Journal of Mechanics and Applied Mathematics. ,vol. 13, pp. 1- 9 ,(1960) , 10.1093/QJMAM/13.1.1
W. Abramowicz, N. Jones, Dynamic progressive buckling of circular and square tubes International Journal of Impact Engineering. ,vol. 4, pp. 243- 270 ,(1986) , 10.1016/0734-743X(86)90017-5