A planar X-band electromagnetic band-gap (EBG) 3-pole filter

作者: Hsiuan-ju Hsu , M.J. Hill , J. Papapolymerou , R.W. Ziolkowski

DOI: 10.1109/LMWC.2002.801136

关键词: Band-pass filterOptoelectronicsBandwidth (signal processing)Printed circuit boardEngineeringX bandChebyshev filterCircuit designElectrical engineeringInsertion lossMetamaterial

摘要: A Duroid-based X-band electromagnetic band gap (EBG) Chebyshev 3-pole bandpass filter that is compatible with standard printed circuit board (PCB) fabrication techniques has been designed, fabricated, and tested. The consists of three EBG cavities in a multi-layer design. It provides 5.95% bandwidth response at the resonant frequency f/sub res/=9.72 GHz corresponding insertion loss 0.9 dB. Isolation higher than 30 dB below 9 above 11 GHz.

参考文章(7)
George Lawrence Matthaei, Leo Young, Edward McClung Thompson Jones, Microwave Filters, Impedance-Matching Networks, and Coupling Structures ,(1980)
J. Chappell, M.P. Little, L.P.B. Katehi, High isolation, planar filters using EBG substrates IEEE Microwave and Wireless Components Letters. ,vol. 11, pp. 246- 248 ,(2001) , 10.1109/7260.928927
J. Papapolymerou, Jui-Ching Cheng, J. East, L.P.B. Katehi, A micromachined high-Q X-band resonator IEEE Microwave and Guided Wave Letters. ,vol. 7, pp. 168- 170 ,(1997) , 10.1109/75.585207
M.J. Hill, R.W. Ziolkowski, J. Papapolymerou, A high-Q reconfigurable planar EBG cavity resonator IEEE Microwave and Wireless Components Letters. ,vol. 11, pp. 255- 257 ,(2001) , 10.1109/7260.928930
H. Uchimura, T. Takenoshita, M. Fujii, Development of the "laminated waveguide" international microwave symposium. ,vol. 46, pp. 2438- 2443 ,(1998) , 10.1109/22.739232
M.J. Hill, R.W. Ziolkowski, J. Papapolymerou, Simulated and measured results from a Duroid-based planar MBG cavity resonator filter IEEE Microwave and Guided Wave Letters. ,vol. 10, pp. 528- 530 ,(2000) , 10.1109/75.895092
Jack East, John Papapolymerou, Linda P. B. Katehi, Jui-Ching Cheng, A Micromachined High- X-Band Resonator ,(1997)