Oxidation behavior of an 11Cr ferritic-martensitic steel after Ar-ions irradiation in supercritical water
作者： Xi Huang , Yinzhong Shen
DOI: 10.1016/J.JNUCMAT.2015.02.024
关键词: Surface modification 、 Materials science 、 Corrosion 、 Oxide 、 Spallation 、 Metallurgy 、 Irradiation 、 Martensite 、 Layer (electronics) 、 Supercritical fluid
摘要: Abstract Corrosion behavior of an 11Cr ferritic–martensitic steel before and after surface modification by Ar-ions irradiation in supercritical water (SCW) at 823 K (550 °C)/25 MPa with different exposure times was investigated to understand the influence on corrosion resistance SCW. The spallation oxide layer occurred region exposed for 100 h. morphology revealed a porous structure without irradiation. Filamentous MnCr2O4 oxides were observed spalling low radiation intensity corresponding dose about 5.65 dpa. Many nano-sized high 10 dpa. Oxide size gradually increased over but grow rate slowly. diameter only 200–300 nm 1000 h.
harvard.edu
sci-hub.se 参考文章(47)
X. Ren, K. Sridharan, T. R. Allen, Corrosion Behavior of Alloys 625 and 718 in Supercritical Water Corrosion. ,vol. 63, pp. 603- 612 ,(2007) , 10.5006/1.3278410
Chonghong Zhang, Keqin Chen, Yinshu Wang, Jiguang Sun, Benfu Hu, Yunfan Jin, Mingdong Hou, Changlong Liu, Youmei Sun, Jin Han, Chaoqing Chen, Microstructural changes in a low-activation Fe-Cr-Mn alloy irradiated with 92 MeV Ar ions at 450°C Journal of Nuclear Materials. ,vol. 283, pp. 259- 262 ,(2000) , 10.1016/S0022-3115(00)00207-5
L. Tan, X. Ren, T.R. Allen, Corrosion behavior of 9-12% Cr ferritic-martensitic steels in supercritical water Corrosion Science. ,vol. 52, pp. 1520- 1528 ,(2010) , 10.1016/J.CORSCI.2009.12.032
R.H. Bogaard, P.D. Desai, H.H. Li, C.Y. Ho, Thermophysical properties of stainless steels Thermochimica Acta. ,vol. 218, pp. 373- 393 ,(1993) , 10.1016/0040-6031(93)80437-F
L. Tan, K. Sridharan, T.R. Allen, R.K. Nanstad, D.A. McClintock, Microstructure tailoring for property improvements by grain boundary engineering Journal of Nuclear Materials. ,vol. 374, pp. 270- 280 ,(2008) , 10.1016/J.JNUCMAT.2007.08.015
Y Kohno, A Kohyama, T Hirose, M.L Hamilton, M Narui, Mechanical property changes of low activation ferritic/martensitic steels after neutron irradiation Journal of Nuclear Materials. ,vol. 271, pp. 145- 150 ,(1999) , 10.1016/S0022-3115(98)00735-1
S.J. Zinkle, G.S. Was, Materials Challenges in Nuclear Energy Acta Materialia. ,vol. 61, pp. 735- 758 ,(2013) , 10.1016/J.ACTAMAT.2012.11.004
X. Ren, K. Sridharan, T. R. Allen, Effect of grain refinement on corrosion of ferritic–martensitic steels in supercritical water environment Materials and Corrosion-werkstoffe Und Korrosion. ,vol. 61, pp. 748- 755 ,(2010) , 10.1002/MACO.200905446
Ziqiang Dong, Zhe Liu, Ming Li, Jing-Li Luo, Weixing Chen, Wenyue Zheng, Dave Guzonas, Effect of ultrasonic impact peening on the corrosion of ferritic–martensitic steels in supercritical water Journal of Nuclear Materials. ,vol. 457, pp. 266- 272 ,(2015) , 10.1016/J.JNUCMAT.2014.11.028
Yun Chen, Kumar Sridharan, Todd Allen, Corrosion behavior of ferritic–martensitic steel T91 in supercritical water Corrosion Science. ,vol. 48, pp. 2843- 2854 ,(2006) , 10.1016/J.CORSCI.2005.08.021