Sliding behavior and wear mechanism of iron and cobalt-based high-temperature alloys against WC and SiC balls
作者： Changming Huang , Bin Zou , Peng Guo , Yanan Liu , Chuanzhen Huang
DOI: 10.1016/J.IJRMHM.2016.05.007
关键词: Materials science 、 Wear resistance 、 Metallurgy 、 Ball (bearing) 、 Friction coefficient 、 Cobalt 、 Silicon carbide 、 Tungsten carbide
摘要: Abstract The sliding behaviors of two typical high-temperature alloys GH2132 and GH605 against WC SiC balls were investigated at environments from room temperature to 800 °C with a speed 50 125 m/min under load 10 20 N. wear performances alloys, rated their mechanisms discussed. four pairs exhibited the markedly different behaviours, in which GH2132/WC pair had maximum friction coefficient 10 N temperature. variation trends ball rates ambient odds those coefficient. higher did not always lead suffer rate. worn depth approximated 250 μm for GH605/WC lower plate. Whether or high temperature, GH605/SiC significantly good resistance minor damage plate despite its
sci-hub.se 参考文章(15)
A.R.C. Sharman, J.I. Hughes, K. Ridgway, The effect of tool nose radius on surface integrity and residual stresses when turning Inconel 718 Journal of Materials Processing Technology. ,vol. 216, pp. 123- 132 ,(2015) , 10.1016/J.JMATPROTEC.2014.09.002
Xiao-yu ZHANG, Ping-di REN, Fa-chun ZHONG, Min-hao ZHU, Zhong-rong ZHOU, Fretting wear and friction oxidation behavior of 0Cr20Ni32AlTi alloy at high temperature Transactions of Nonferrous Metals Society of China. ,vol. 22, pp. 825- 830 ,(2012) , 10.1016/S1003-6326(11)61251-X
E. Ciudad, O. Borrero-López, F. Rodríguez-Rojas, A.L. Ortiz, F. Guiberteau, Effect of intergranular phase chemistry on the sliding-wear resistance of pressureless liquid-phase-sintered α-SiC Journal of The European Ceramic Society. ,vol. 32, pp. 511- 516 ,(2012) , 10.1016/J.JEURCERAMSOC.2011.09.011
Sandan Kumar Sharma, B Venkata Manoj Kumar, Young-Wook Kim, None, Effect of WC addition on sliding wear behavior of SiC ceramics Ceramics International. ,vol. 41, pp. 3427- 3437 ,(2015) , 10.1016/J.CERAMINT.2014.10.144
Jinming Zhen, Fei Li, Shengyu Zhu, Jiqiang Ma, Zhuhui Qiao, Weimin Liu, Jun Yang, Friction and wear behavior of nickel-alloy-based high temperature self-lubricating composites against Si3N4 and Inconel 718 Tribology International. ,vol. 75, pp. 1- 9 ,(2014) , 10.1016/J.TRIBOINT.2014.03.005
D.J. Stephenson, J.R. Nicholls, P. Hancock, Particle-surface interactions during the erosion of a gas turbine material (MarM002) by pyrolytic carbon particles Wear. ,vol. 111, pp. 15- 29 ,(1986) , 10.1016/0043-1648(86)90072-4
D Dudzinski, A Devillez, A Moufki, D Larrouquère, V Zerrouki, J Vigneau, A review of developments towards dry and high speed machining of Inconel 718 alloy International Journal of Machine Tools & Manufacture. ,vol. 44, pp. 439- 456 ,(2004) , 10.1016/S0890-6955(03)00159-7
Yucel Birol, Thermal fatigue testing of Inconel 617 and Stellite 6 alloys as potential tooling materials for thixoforming of steels Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 527, pp. 1938- 1945 ,(2010) , 10.1016/J.MSEA.2009.11.021
Bin Zou, Ming Chen, Chuanzhen Huang, Qinglong An, Study on surface damages caused by turning NiCr20TiAl nickel-based alloy Journal of Materials Processing Technology. ,vol. 209, pp. 5802- 5809 ,(2009) , 10.1016/J.JMATPROTEC.2009.06.017
Jie Li, Yonghao Lu, Haoyang Zhang, Long Xin, Effect of grain size and hardness on fretting wear behavior of Inconel 600 alloys Tribology International. ,vol. 81, pp. 215- 222 ,(2015) , 10.1016/J.TRIBOINT.2014.08.005