An overlapping crisscross micromixer

作者: Lilin Wang , Jing-Tang Yang , Ping-Chiang Lyu

DOI: 10.1016/J.CES.2006.09.048

关键词: Mixing (physics)MicromixerFlow visualizationMaterials scienceFluid mechanicsPressure dropFlow (mathematics)MechanicsSimulationVolumetric flow rateMicromixing

摘要: … We propose a grooved micromixer incorporating an overlapping crisscross inlet port that is … mixing performance of this novel overlapping crisscross micromixer by 46% compared with …

参考文章(16)
Volker Hessel, Holger Löwe, Friedhelm Schönfeld, Micromixers—a review on passive and active mixing principles Chemical Engineering Science. ,vol. 60, pp. 2479- 2501 ,(2005) , 10.1016/J.CES.2004.11.033
Abraham D. Stroock, Stephan K. Dertinger, George M. Whitesides, Armand Ajdari, Patterning flows using grooved surfaces Analytical Chemistry. ,vol. 74, pp. 5306- 5312 ,(2002) , 10.1021/AC0257389
Rustem F. Ismagilov, David Rosmarin, Paul J. A. Kenis, Daniel T. Chiu, Wendy Zhang, Howard A. Stone, George M. Whitesides, Pressure-driven laminar flow in tangential microchannels: an elastomeric microfluidic switch. Analytical Chemistry. ,vol. 73, pp. 4682- 4687 ,(2001) , 10.1021/AC010374Q
David D. Cunningham, Fluidics and sample handling in clinical chemical analysis Analytica Chimica Acta. ,vol. 429, pp. 1- 18 ,(2001) , 10.1016/S0003-2670(00)01256-3
Daniel E. Groszmann, Chris B. Rogers, Turbulent scales of dilute particle-laden flows in microgravity Physics of Fluids. ,vol. 16, pp. 4671- 4684 ,(2004) , 10.1063/1.1811131
Abraham D Stroock, Stephan KW Dertinger, Armand Ajdari, Igor Mezic, Howard A Stone, George M Whitesides, Chaotic Mixer for Microchannels Science. ,vol. 295, pp. 647- 651 ,(2002) , 10.1126/SCIENCE.1066238
J. P. Van Doormaal, G. D. Raithby, ENHANCEMENTS OF THE SIMPLE METHOD FOR PREDICTING INCOMPRESSIBLE FLUID FLOWS Numerical Heat Transfer Part A-applications. ,vol. 7, pp. 147- 163 ,(1984) , 10.1080/01495728408961817
J. Aubin, D.F. Fletcher, C. Xuereb, Design of micromixers using CFD modelling Chemical Engineering Science. ,vol. 60, pp. 2503- 2516 ,(2005) , 10.1016/J.CES.2004.11.043