Dynamic viscoelastic properties in torsion of four commercially available resins for crown and bridge.

作者: Koichi FUJII , Gakuji TSUKADA , Osamu UENO , Akira IMAIZUMI , Akihisa MASUDA

DOI: 10.4012/DMJ.17.205

关键词: Composite materialKnoop hardness testMaterials scienceTorsion (mechanics)Materials testingViscoelasticityElasticity (economics)Thermal expansionShear modulus

摘要: In order to clarify the viscoelastic properties of four commercial resins for crown and bridge, dynamic shear modulus (G'), Knoop hardness (KHN), filler content, quantity unreacted substance thermal expansion were measured. The results as follows. G' (37 degrees C) each material ranged from 2.61-11.1 GPa, gradually decreased with increasing temperature. KHN (23 29.4 120, most significant correlation (0.999) was found between KHN. Of relationship among G', content substance, there a highly (0.980) content. coefficient linear-thermal (alpha) also 17.9-65.0 x 10(-6)/degree C (25-60 C), (-0.961) alpha meaningful. It can be presumed that temperature dependence is closely connected specific volume material, together an increase in

参考文章(12)
M. Braden, G.D. Stafford, Viscoelastic Properties of Some Denture Base Materials Journal of Dental Research. ,vol. 47, pp. 519- 523 ,(1968) , 10.1177/00220345680470040201
I.E. Ruyter, I.J. Sjøvik Kleven, Monomers and filler content of resin-based crown and bridge materials Dental Materials. ,vol. 3, pp. 315- 321 ,(1987) , 10.1016/S0109-5641(87)80068-4
M.J. Barsby, M. Braden, Visco-elastic Properties of Pour (Fluid) Denture Base Resins Journal of Dental Research. ,vol. 60, pp. 146- 148 ,(1981) , 10.1177/00220345810600020901
J.L. Ferracane, J.R. Condon, Post-cure heat treatments for composites: properties and fractography Dental Materials. ,vol. 8, pp. 290- 295 ,(1992) , 10.1016/0109-5641(92)90102-I
K. INOUE, I. HAYASHI, Residual monomer (Bis‐GMA) of composite resins Journal of Oral Rehabilitation. ,vol. 9, pp. 493- 497 ,(1982) , 10.1111/J.1365-2842.1982.TB01039.X
Seiji BAN, Yosifumi TAKAHASHI, Hiroaki TANASE, Jiro HASEGAWA, Heat curing behavior of light-cured composite resins investigated by dynamic differential scanning calorimetry Dental Materials Journal. ,vol. 9, pp. 153- 162 ,(1990) , 10.4012/DMJ.9.153
Hiroyuki ARIKAWA, Katsuichiro INOUE, Dynamic shear modulus in torsion of human dentin. Dental Materials Journal. ,vol. 7, pp. 182- ,(1988) , 10.4012/DMJ.7.182
Minoru KAWAGUCHI, Tadao FUKUSHIMA, Takashi HORIBE, Effect of monomer structure on the mechanical properties of light-cured composite resins. Dental Materials Journal. ,vol. 8, pp. 40- 45 ,(1989) , 10.4012/DMJ.8.40
Koji Miyazaki, Takahiro Komoto, Takashi Horibe, Tomoji Matsuura, Relationship among the composition and the physical and chemical properties of photo-cured composites for crown and bridge. Nihon Hotetsu Shika Gakkai Zasshi. ,vol. 33, pp. 510- 516 ,(1989) , 10.2186/JJPS.33.510
Jyoshin K, Fujii K, Uchiyama C, Kuroki K, Inoue K, Ginya K, Kanie T, Arikawa H, Composite restorative resins. Part 2. Physical and mechanical properties of UV and visible light-activated composite resins. Dental Materials Journal. ,vol. 5, pp. 252- 259 ,(1986)