The metallurgical and deformation behaviours of laminar metal matrix composites after ballistic impact
作者： MB Karamis , FEHMİ Nair , AA Cerit , None
DOI: 10.1016/J.JMATPROTEC.2009.01.008
关键词: Ballistic impact 、 Metal matrix composite 、 Composite material 、 Aluminium 、 Materials science 、 Metallurgy 、 2024 aluminium alloy 、 Projectile 、 Deformation (engineering) 、 Hot pressing 、 Laminar flow
摘要: In this study, two types of laminar metal matrix composite (MMC) samples were manufactured. Their failure mechanisms and deformation behaviours were investigated to evaluate ballistic performance. These laminated samples consist of sub-MMC layers and un-reinforced Al layers. The sub-MMC layers were MMC layers produced from particulate-Al2O3-reinforced AA 2024 aluminium alloys. These layers were manufactured using both squeeze casting and hot pressing techniques. They were laminated with un-reinforced AA …
elsevier.com
sci-hub.se 参考文章(18)
S. Yadav, D.R. Chichili, K.T. Ramesh, The mechanical response of a 6061-T6 A1/A12O3 metal matrix composite at high rates of deformation Acta Metallurgica et Materialia. ,vol. 43, pp. 4453- 4464 ,(1995) , 10.1016/0956-7151(95)00123-D
M. Baki Karamış, Tribology at high-velocity impact☆ Tribology International. ,vol. 40, pp. 98- 104 ,(2007) , 10.1016/J.TRIBOINT.2006.02.063
B. Landkof, W. Goldsmith, Petalling of thin, metallic plates during penetration by cylindro-conical projectiles International Journal of Solids and Structures. ,vol. 21, pp. 245- 266 ,(1985) , 10.1016/0020-7683(85)90021-6
I. A. Ibrahim, F. A. Mohamed, E. J. Lavernia, Particulate reinforced metal matrix composites — a review Journal of Materials Science. ,vol. 26, pp. 1137- 1156 ,(1991) , 10.1007/BF00544448
Stefanos Skolianos, Mechanical behavior of cast SiCp-reinforced Al-4.5%Cu-1.5%Mg alloy Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 210, pp. 76- 82 ,(1996) , 10.1016/0921-5093(95)10043-1
B. Wang, S.M. Chou, The behaviour of laminated composite plates as armour Journal of Materials Processing Technology. ,vol. 68, pp. 279- 287 ,(1997) , 10.1016/S0924-0136(96)00032-5
Tomasz Wierzbicki, Petalling of plates under explosive and impact loading International Journal of Impact Engineering. ,vol. 22, pp. 935- 954 ,(1999) , 10.1016/S0734-743X(99)00028-7
MB Karamis, A Tasdemirci, FEHM Nair, None, Failure and tribological behaviour of the AA5083 and AA6063 composites reinforced by SiC particles under ballistic impact Composites Part A-applied Science and Manufacturing. ,vol. 34, pp. 217- 226 ,(2003) , 10.1016/S1359-835X(03)00024-1
R. Zaera, S. Sánchez-Sáez, J.L. Pérez-Castellanos, C. Navarro, Modelling of the adhesive layer in mixed ceramic/metal armours subjected to impact Composites Part A-applied Science and Manufacturing. ,vol. 31, pp. 823- 833 ,(2000) , 10.1016/S1359-835X(00)00027-0
MB Karamis, FEHMİ Nair, A Tasdemirci, None, Analyses of metallurgical behavior of Al–SiCp composites after ballistic impacts Composite Structures. ,vol. 64, pp. 219- 226 ,(2004) , 10.1016/J.COMPSTRUCT.2003.08.005