On the achieving uniform finishing allowance through identifying shape deviation for additive manufacturing
作者： Prashant K. Jain , Mohammad Taufik
DOI: 10.1080/14484846.2021.1873067
关键词: Allowance (engineering) 、 Shape deviation 、 Mathematics 、 Slicing 、 Mechanical engineering
摘要: While additive manufacturing (AM), due to the stair-stepping effect, post-processing is required for which parts should be made with uniform allowance on all surfaces. Four shape de...
mendeley.com参考文章(38)
Ranita Biswas, Partha Bhowmick, Layer the sphere The Visual Computer. ,vol. 31, pp. 787- 797 ,(2015) , 10.1007/S00371-015-1101-3
Noshir A Langrana, Dan Qiu, Evan Bossett, Stephen C Danforth, Mohsen Jafari, Ahmad Safari, Virtual simulation and video microscopy for fused deposition methods Materials & Design. ,vol. 21, pp. 75- 82 ,(2000) , 10.1016/S0261-3069(99)00059-X
Giovanni Moroni, Wahyudin P. Syam, Stefano Petrò, Towards Early Estimation of Part Accuracy in Additive Manufacturing Procedia CIRP. ,vol. 21, pp. 300- 305 ,(2014) , 10.1016/J.PROCIR.2014.03.194
Stéphane Danjou, Peter Köhler, Improving part quality and process efficiency in layered manufacturing by adaptive slicing Virtual and Physical Prototyping. ,vol. 5, pp. 183- 188 ,(2010) , 10.1080/17452759.2010.527010
Mohammad Taufik, Prashant K. Jain, Role of build orientation in layered manufacturing: a review International Journal of Manufacturing Technology and Management. ,vol. 27, pp. 47- 73 ,(2013) , 10.1504/IJMTM.2013.058637
Hong Seok Kim, Ki-Hoon Shin, Material pixel-based process planning for layered manufacturing of heterogeneous objects International Journal of Precision Engineering and Manufacturing. ,vol. 15, pp. 2421- 2427 ,(2014) , 10.1007/S12541-014-0609-1
S.H. Choi, A.M.M. Chan, A virtual prototyping system for rapid product development Computer-aided Design. ,vol. 36, pp. 401- 412 ,(2004) , 10.1016/S0010-4485(03)00110-6
Prashant Kulkarni, Debasish Dutta, An accurate slicing procedure for layered manufacturing Computer-aided Design. ,vol. 28, pp. 683- 697 ,(1996) , 10.1016/0010-4485(95)00083-6
Prashant K. Jain, Pulak M. Pandey, P. V. M. Rao, Effect of delay time on part strength in selective laser sintering The International Journal of Advanced Manufacturing Technology. ,vol. 43, pp. 117- 126 ,(2009) , 10.1007/S00170-008-1682-3
Y.-S. Liao, Y.-Y. Chiu, A New Slicing Procedure for Rapid Prototyping Systems The International Journal of Advanced Manufacturing Technology. ,vol. 18, pp. 579- 585 ,(2001) , 10.1007/S001700170034