Nanoparticle suspension preparation using the arc spray nanoparticle synthesis system combined with ultrasonic vibration and rotating electrode
作者： H. Chang , T.T. Tsung , Y.C. Yang , L.C. Chen , H.M. Lin
DOI: 10.1007/S00170-003-2029-8
关键词: Dispersion (chemistry) 、 Materials science 、 Composite material 、 Nanotechnology 、 Nanoparticle 、 Suspension (vehicle) 、 Electrode 、 Particle size 、 Liquid dielectric 、 Pulse duration 、 Vacuum arc
摘要: This study aims to investigate the use of a new nanoparticle preparation method, i.e., arc spray synthesis system (ASNSS) combined with ultrasonic vibration and rotating electrode, prepare TiO2 suspension. For proposed method suspension preparation, this has designed four different process modes experimentation for comparison, in order obtain suspended nanoparticles smaller particle size relatively good dispersion. discusses settings variables including peak current, pulse duration, breakdown voltage, temperature dielectric fluid amplitude vibration, determine better conditions The Transition Electron Microscope (TEM) image experiment result shows that prepared by assisted vacuum an average less than 10 nm.
springer.com
elsevier.com
sci-hub.se 参考文章(11)
Hee Dong Jang, Seong-Kil Kim, Seung-Jin Kim, Effect of Particle Size and Phase Composition of Titanium Dioxide Nanoparticles on the Photocatalytic Properties Journal of Nanoparticle Research. ,vol. 3, pp. 141- 147 ,(2001) , 10.1023/A:1017948330363
Jia Zhixin, Zhang Jianhua, Ai Xing, Study on a new kind of combined machining technology of ultrasonic machining and electrical discharge machining International Journal of Machine Tools & Manufacture. ,vol. 37, pp. 193- 199 ,(1997) , 10.1016/S0890-6955(96)00048-X
Philip T. Eubank, Mukund R. Patel, Maria A. Barrufet, Bedri Bozkurt, Theoretical models of the electrical discharge machining process. III. The variable mass, cylindrical plasma model Journal of Applied Physics. ,vol. 73, pp. 7900- 7909 ,(1993) , 10.1063/1.353942
D. Kremer, J.L. Lebrun, B. Hosari, A. Moisan, Effects of Ultrasonic Vibrations on the Performances in EDM CIRP Annals. ,vol. 38, pp. 199- 202 ,(1989) , 10.1016/S0007-8506(07)62684-5
D. Kremer, C. Lhiaubet, A. Moisan, A Study of the Effect of Synchronizing Ultrasonic Vibrations with Pulses in EDM CIRP Annals. ,vol. 40, pp. 211- 214 ,(1991) , 10.1016/S0007-8506(07)61970-2
Yan Cherng Lin, Biing Hwa Yan, Yong Song Chang, Machining characteristics of titanium alloy (Ti–6Al–4V) using a combination process of EDM with USM Journal of Materials Processing Technology. ,vol. 104, pp. 171- 177 ,(2000) , 10.1016/S0924-0136(00)00539-2
Mukund R. Patel, Maria A. Barrufet, Philip T. Eubank, Daryl D. DiBitonto, Theoretical models of the electrical discharge machining process. II. The anode erosion model Journal of Applied Physics. ,vol. 66, pp. 4104- 4111 ,(1989) , 10.1063/1.343995
M Ghoreishi, J Atkinson, A comparative experimental study of machining characteristics in vibratory, rotary and vibro-rotary electro-discharge machining Journal of Materials Processing Technology. ,vol. 120, pp. 374- 384 ,(2002) , 10.1016/S0924-0136(01)01160-8
Daryl D. DiBitonto, Philip T. Eubank, Mukund R. Patel, Maria A. Barrufet, Theoretical models of the electrical discharge machining process. I. A simple cathode erosion model Journal of Applied Physics. ,vol. 66, pp. 4095- 4103 ,(1989) , 10.1063/1.343994
Tsing-Tshih Tsung, Ho Chang, Liang-Chia Chen, Lee-Long Han, Chih-Hung Lo, Ming-Kun Liu, Development of Pressure Control Technique of An Arc-Submerged Nanoparticle Synthesis System (ASNSS) for Copper Nanoparticle Fabrication Materials Transactions. ,vol. 44, pp. 1138- 1142 ,(2003) , 10.2320/MATERTRANS.44.1138