Effect of SnO2 Coating on the Low Temperature Extrusion of 6061Al Matrix Composite Reinforced with Aluminum Borate Whisker
作者： Pei Tang Zhao , Zhi Ming Du , Li Dong Wang , Wei Dong Fei
DOI: 10.4028/WWW.SCIENTIFIC.NET/AMR.299-300.692
关键词: Ultimate tensile strength 、 Composite material 、 Aluminium 、 Monocrystalline whisker 、 Whisker 、 Materials science 、 Coating 、 Deformation (engineering) 、 Extrusion 、 Composite number 、 General Engineering
摘要: The 6061Al matrix composites reinforced with SnO2-coated aluminum borate whisker were fabricated using squeeze casting method. The composites with different SnO2 coating contents were extruded successfully at 350°C with the extrusion rate of 18mm/s. The results show that the Sn particles at the interface as liquid state at extrusion temperature result in the reduction of the extrusion load and the decrease of the probability of whisker fracture during hot deformation process. Moreover, unlike many surface cracks can be seen in the extruded composite without whisker coating, the surface crack-free extruded rods can be obtained for composites with whisker coating. The ABOW/SnO/6061Al composites tensile properties increased obviously after extrusion.
sci-hub.se 参考文章(16)
T. P. D. Rajan, R. M. Pillai, B. C. Pai, Reinforcement coatings and interfaces in aluminium metal matrix composites Journal of Materials Science. ,vol. 33, pp. 3491- 3503 ,(1998) , 10.1023/A:1004674822751
W. G. Chu, J. Hu, W. D. Fei, C. K. Yao, L. Liu, Microstructures evaluation of isothermally-forged SiCw/Al composites Journal of Materials Science. ,vol. 34, pp. 565- 569 ,(1999) , 10.1023/A:1004550813841
Wei-Dong Fei, Wen-Zuo Li, Chong-Kai Yao, None, Hot rolling behaviors of whisker reinforced aluminum composites Journal of Materials Science. ,vol. 37, pp. 211- 215 ,(2002) , 10.1023/A:1013199320555
T. W. Clyne, P. J. Withers, An introduction to metal matrix composites ,(1993)
Z LI, W FEI, H YUE, L WANG, Hot deformation behaviors of Bi2O3-coated Al18B4O33 whisker reinforced aluminum matrix composite with high formability Composites Science and Technology. ,vol. 67, pp. 963- 973 ,(2007) , 10.1016/J.COMPSCITECH.2006.06.009
CA Stanford-Beale, TW Clyne, None, Extrusion and high-temperature deformation of fibre-reinforced aluminium Composites Science and Technology. ,vol. 35, pp. 121- 157 ,(1989) , 10.1016/0266-3538(89)90092-4
Soon H. Hong, Kyung H. Chung, Chi H. Lee, Effects of hot extrusion parameters on the tensile properties and microstructures of SiCw-2124Al composites Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 206, pp. 225- 232 ,(1996) , 10.1016/0921-5093(95)09996-4
C.G Kang, N.H Kim, B.M Kim, The effect of die shape on the hot extrudability and mechanical properties of 6061 Al/Al2O3 composites Journal of Materials Processing Technology. ,vol. 100, pp. 53- 62 ,(2000) , 10.1016/S0924-0136(99)00440-9
J HU, X WANG, S TANG, A study of damping capacities in pure aluminum matrix composites reinforced with SnO2-coated and uncoated alumina borate whiskers Composites Science and Technology. ,vol. 68, pp. 2297- 2299 ,(2008) , 10.1016/J.COMPSCITECH.2008.04.014
H.Y. Yue, L.D. Wang, W.D. Fei, Improvement of the tensile strength of Al18B4O33w/Al composite at elevated temperatures by change of interfacial state Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 486, pp. 409- 412 ,(2008) , 10.1016/J.MSEA.2007.09.018