Effect of modified clay and Mg(OH)2 on the properties of ethylene propylene diene monomer/silicon rubber nanocomposites
作者： Jeannette N Asaad , Doaa E El-Nashar , Samia H Mansour
关键词: Composite material 、 Pulmonary surfactant 、 Transmission electron microscopy 、 Exfoliation joint 、 Distilled water 、 Scanning electron microscope 、 Nanocomposite 、 Materials science 、 Chemical engineering 、 Flammability 、 Natural rubber
摘要: Ethylene propylene diene monomer and silicon rubber were blended in different ratios, the physico-mechanical properties cure characteristics studied. It was found that ratio 60/40 phr (parts per hundred parts of rubber) ethylene monomer/silicon exhibited best value. Therefore, this loaded with required concentration each, unmodified clay two modified clays (one distilled water other anionic surfactant), to prepare nanocomposites. The characterized by X-ray diffraction transmission electron microscopy. nanocomposites investigated terms characteristics, scanning microscopy, flammability mechanical thermal properties. noted resulted highest microscopy revealed exfoliation nanoc...
sagepub.com
sci-hub.se 参考文章(32)
A Alemdar, N Güngor, FB Erim, None, Effect of sodium dodecyl sulfate and sodium dodecyl benzene sulfonate on the flow behavior of purified bentonite dispersion Journal of Materials Science Letters. ,vol. 22, pp. 89- 90 ,(2003) , 10.1023/A:1021836115359
Varun Thakur, R.N. Mahaling, Anil K. Bhowmick, Gert Heinrich, Sandip Rooj, Amit Das, Preparation and properties of natural nanocomposites based on natural rubber and naturally occurring halloysite nanotubes Materials & Design. ,vol. 31, pp. 2151- 2156 ,(2010) , 10.1016/J.MATDES.2009.11.009
Huanan Wang, Yi Zuo, Qin Zou, Lin Cheng, Di Huang, Li Wang, Yubao Li, Nano‐hydroxyapatite/polyamide66 composite tissue‐engineering scaffolds with anisotropy in morphology and mechanical behaviors Journal of Polymer Science Part A. ,vol. 47, pp. 658- 669 ,(2009) , 10.1002/POLA.23171
Ji-Fang Fu, Wen-Qi Yu, Xing Dong, Li-Ya Chen, Hai-Sen Jia, Li-Yi Shi, Qing-Dong Zhong, Wei Deng, Mechanical and tribological properties of natural rubber reinforced with carbon blacks and Al2O3 nanoparticles Materials & Design. ,vol. 49, pp. 336- 346 ,(2013) , 10.1016/J.MATDES.2013.01.033
H Lorenz, J Fritzsche, A Das, KW Stöckelhuber, R Jurk, G Heinrich, M Klüppel, None, Advanced elastomer nano-composites based on CNT-hybrid filler systems Composites Science and Technology. ,vol. 69, pp. 2135- 2143 ,(2009) , 10.1016/J.COMPSCITECH.2009.05.014
D. E. El-Nashar, E. M. Sadek, Preparation and characterization of nitrile butadiene rubber-nanoclay composites with maleic acid anhydride as compatibilizer. Part II Physico-mechanical properties and thermo-oxidative aging High Performance Polymers. ,vol. 24, pp. 664- 670 ,(2012) , 10.1177/0954008312448406
J Wu, Optimization method for powertrain mounting systems with uncertain parameters Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. ,vol. 226, pp. 147- 157 ,(2012) , 10.1177/0954407011416308
Krishna C. Etika, Lei Liu, Lance A. Hess, Jaime C. Grunlan, The influence of synergistic stabilization of carbon black and clay on the electrical and mechanical properties of epoxy composites Carbon. ,vol. 47, pp. 3128- 3136 ,(2009) , 10.1016/J.CARBON.2009.07.031
T Agag, T Koga, T Takeichi, Studies on thermal and mechanical properties of polyimide-clay nanocomposites Polymer. ,vol. 42, pp. 3399- 3408 ,(2001) , 10.1016/S0032-3861(00)00824-7
Jeffrey W. Gilman, Catheryn L. Jackson, Alexander B. Morgan, Richard Harris, Evangelos Manias, Emmanuel P. Giannelis, Melanie Wuthenow, Dawn Hilton, Shawn H. Phillips, Flammability Properties of Polymer - Layered-Silicate Nanocomposites. Polypropylene and Polystyrene Nanocomposites Chemistry of Materials. ,vol. 12, pp. 1866- 1873 ,(2000) , 10.1021/CM0001760