Microstructure of a Type G Oil Well Cement-Nanosilica Blend
作者： Andrew Griffin , Jung J. Kim , Muhammad K. Rahman , Mahmoud M. Reda Taha
DOI: 10.1061/(ASCE)MT.1943-5533.0001124
关键词: Silicate 、 Composite material 、 Elastic modulus 、 Curing (chemistry) 、 Materials science 、 Pozzolan 、 Cement 、 Oil well 、 Calcium silicate hydrate 、 Nanoindentation
摘要: AbstractMotivated by the need to improve oil well integrity for potential carbon capture and storage through CO2 sequestration, nanosilica was hypothesized capable of improving quality cement (OWC) in medium deep wells. In this study, OWC mixed with 1 3% weight produce pastes water binder ratio (w/b) 0.45. The specimens were cured under high temperature pressure, simulating what occurs A method analysis combining Si29 nuclear magnetic resonance (NMR) nanoindentation is proposed. results are compared observations extracted from which classification hydration products based on elastic modulus different categories calcium silicate hydrate (C-S-H). show that degree hydration, reactivity, polymerization increase elevated curing condition ambient condition. It seems C-S-H generated pozzolanic...
sci-hub.se 参考文章(47)
J A Larbi, MICROSTRUCTURE OF THE INTERFACIAL ZONE AROUND AGGREGATE PARTICLES IN CONCRETE Heron. ,vol. 38, ,(1993)
Franz-Josef Ulm, Matthieu Vandamme, Chris Bobko, Jose Alberto Ortega, Kuangshin Tai, Christine Ortiz, Statistical indentation techniques for hydrated nanocomposites: concrete, bone, and shale Journal of the American Ceramic Society. ,vol. 90, pp. 2677- 2692 ,(2007) , 10.1111/J.1551-2916.2007.02012.X
Karen L. Scrivener, R. James Kirkpatrick, Innovation in use and research on cementitious material Cement and Concrete Research. ,vol. 38, pp. 128- 136 ,(2008) , 10.1016/J.CEMCONRES.2007.09.025
S C Halim, T J Brunner, R N Grass, M Bohner, W J Stark, Preparation of an ultra fast binding cement from calcium silicate-based mixed oxide nanoparticles Nanotechnology. ,vol. 18, pp. 395701- ,(2007) , 10.1088/0957-4484/18/39/395701
Karine Velez, Sandrine Maximilien, Denis Damidot, Gilbert Fantozzi, Fransois Sorrentino, Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker Cement and Concrete Research. ,vol. 31, pp. 555- 561 ,(2001) , 10.1016/S0008-8846(00)00505-6
Laetitia Patural, Patrice Porion, Henri Van Damme, Alexandre Govin, Philippe Grosseau, Bertrand Ruot, Olivier Devès, A pulsed field gradient and NMR imaging investigations of the water retention mechanism by cellulose ethers in mortars Cement and Concrete Research. ,vol. 40, pp. 1378- 1385 ,(2010) , 10.1016/J.CEMCONRES.2010.04.001
I.G. Richardson, Tobermorite/jennite- and tobermorite/calcium hydroxide-based models for the structure of C-S-H: applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, Portland cement, and blends of Portland cement with blast-furnace slag, metakaolin, or silica fume Cement and Concrete Research. ,vol. 34, pp. 1733- 1777 ,(2004) , 10.1016/J.CEMCONRES.2004.05.034
Florence Sanchez, Konstantin Sobolev, Nanotechnology in concrete – A review Construction and Building Materials. ,vol. 24, pp. 2060- 2071 ,(2010) , 10.1016/J.CONBUILDMAT.2010.03.014
Wenzhong Zhu, John J. Hughes, Nenad Bicanic, Chris J. Pearce, Nanoindentation mapping of mechanical properties of cement paste and natural rocks Materials Characterization. ,vol. 58, pp. 1189- 1198 ,(2007) , 10.1016/J.MATCHAR.2007.05.018
Jeffrey J. Thomas, Hamlin M. Jennings, A colloidal interpretation of chemical aging of the C-S-H gel and its effects on the properties of cement paste Cement and Concrete Research. ,vol. 36, pp. 30- 38 ,(2006) , 10.1016/J.CEMCONRES.2004.10.022