Development of a Novel Vacuum Pyrolysis Reactor with Improved Heat Transfer Potential
作者： C. Roy , J. Yang , D. Blanchette , L. Korving , B. De Caumia
DOI: 10.1007/978-94-009-1559-6_28
关键词: Nuclear engineering 、 Batch reactor 、 Continuous reactor 、 Raw material 、 Waste management 、 Heat transfer 、 Particle 、 Heat transfer coefficient 、 Heating system 、 Kiln 、 Materials science
摘要: … The other novelty of this reactor is the use of an indirect heating system … heat transfer model proposed herein assumes that the heat transfer in a moving bed is only a function of the heat …
springer.com
sci-hub.se 参考文章(13)
Howard Kay Graham, Mixing of Solids Advances in Chemical Engineering. ,vol. 2, pp. 209- 324 ,(1958) , 10.1016/S0065-2377(08)60229-X
Don Wesley Green, James O Maloney, Robert Howard Perry, Perry's Chemical Engineers' Handbook ,(2007)
J. Yang, P.A. Tanguy, C. Roy, Heat transfer, mass transfer and kinetics study of the vacuum pyrolysis of a large used tire particle Chemical Engineering Science. ,vol. 50, pp. 1909- 1922 ,(1995) , 10.1016/0009-2509(95)00062-A
Karun Malhotra, Arun S. Mujumdar, INDIRECT HEAT TRANSFER AND DRYING IN MECHANICALLY AGITATED GRANULAR BEDS - AN ANNOTATED BIBLIOGRAPHY Drying Technology. ,vol. 7, pp. 153- 171 ,(1989) , 10.1080/07373938908916583
Christian Roy, Blaise Labrecque, Bruno de Caumia, Recycling of scrap tires to oil and carbon black by vacuum pyrolysis Resources Conservation and Recycling. ,vol. 4, pp. 203- 213 ,(1990) , 10.1016/0921-3449(90)90002-L
Donald A. Plautz, H. F. Johnstone, Heat and mass transfer in packed beds Aiche Journal. ,vol. 1, pp. 193- 199 ,(1955) , 10.1002/AIC.690010211
E.U Schlünder, Heat transfer to packed and stirred beds from the surface of immersed bodies Chemical Engineering and Processing: Process Intensification. ,vol. 18, pp. 31- 53 ,(1984) , 10.1016/0255-2701(84)85007-2
J. Lehmberg, M. Hehl, K. Schügerl, Transverse mixing and heat transfer in horizontal rotary drum reactors Powder Technology. ,vol. 18, pp. 149- 163 ,(1977) , 10.1016/0032-5910(77)80004-1
Karun Malhotra, Arun S. Mujumdar, Effect of particle shape on particle-surface thermal contact resistance. Journal of Chemical Engineering of Japan. ,vol. 23, pp. 510- 513 ,(1990) , 10.1252/JCEJ.23.510
M.H. Cooke, D.J. Stephens, J. Bridgwater, Powder mixing — a literature survey Powder Technology. ,vol. 15, pp. 1- 20 ,(1976) , 10.1016/0032-5910(76)80025-3