Improvement of PVD coated inserts cutting performance, through appropriate mechanical treatments of substrate and coating surface
作者： K.-D Bouzakis , N Michailidis , S Hadjiyiannis , K Efstathiou , E Pavlidou
DOI: 10.1016/S0257-8972(01)01485-2
关键词: Physical vapor deposition 、 Materials science 、 Thin film 、 Composite material 、 Scanning electron microscope 、 Surface roughness 、 Coating 、 Nanoindentation 、 Polishing 、 Engineering drawing 、 Substrate (printing)
摘要: … other treatments, the coating during cutting shows local failure earlier and the tool flank and rake are no longer protected. Typical improvements in cutting performance were monitored …
elsevier.com
sci-hub.se 参考文章(11)
H.K Tönshoff, A Mohlfeld, C Gey, J Winkler, Surface modification of cemented carbide cutting tools for improved adhesion of diamond coatings Surface & Coatings Technology. ,vol. 108, pp. 543- 550 ,(1998) , 10.1016/S0257-8972(98)00634-3
K.-D Bouzakis, N Vidakis, T Leyendecker, G Erkens, R Wenke, Determination of the fatigue properties of multilayer PVD coatings on various substrates, based on the impact test and its FEM simulation Thin Solid Films. ,vol. 308, pp. 315- 322 ,(1997) , 10.1016/S0040-6090(97)00561-0
K.-D. Bouzakis, N. Michailidis, G. Erkens, Thin hard coatings stress–strain curve determination through a FEM supported evaluation of nanoindentation test results Surface & Coatings Technology. ,vol. 142, pp. 102- 109 ,(2001) , 10.1016/S0257-8972(01)01275-0
K.-D. Bouzakis, N. Michailidis, N. Vidakis, K. Eftathiou, S. Kompogiannis, G. Erkens, Interpretation of PVD coated inserts wear phenomena in turning CIRP Annals. ,vol. 49, pp. 65- 68 ,(2000) , 10.1016/S0007-8506(07)62897-2
K.-D. Bouzakis, N. Vidakis, N. Michailidis, T. Leyendecker, G. Erkens, G. Fuss, Quantification of properties modification and cutting performance of (Ti1-xAlx)N coatings at elevated temperatures Surface & Coatings Technology. ,vol. 120, pp. 34- 43 ,(1999) , 10.1016/S0257-8972(99)00336-9
K.-D Bouzakis, N Michailidis, N Vidakis, K Efstathiou, T Leyendecker, G Erkens, R Wenke, H.-G Fuss, Optimization of the cutting edge radius of PVD coated inserts in milling considering film fatigue failure mechanisms Surface & Coatings Technology. ,vol. 133, pp. 501- 507 ,(2000) , 10.1016/S0257-8972(00)00971-3
F. Klocke, T. Krieg, Coated Tools for Metal Cutting – Features and Applications CIRP Annals. ,vol. 48, pp. 515- 525 ,(1999) , 10.1016/S0007-8506(07)63231-4
H.K Tönshoff, H Seegers, Influence of residual stress gradients on the adhesion strength of sputtered hard coatings Thin Solid Films. ,vol. 377-378, pp. 340- 345 ,(2000) , 10.1016/S0040-6090(00)01308-0
K.-D. Bouzakis, N. Vidakis, K. David, The concept of an advanced impact tester supported by evaluation software for the fatigue strength characterization of hard layered media Thin Solid Films. ,vol. 355, pp. 322- 329 ,(1999) , 10.1016/S0040-6090(99)00451-4
K.-D. Bouzakis, N. Michailidis, N. Vidakis, K. Efstathiou, Failure mechanisms of physically vapour deposited coated hardmetal cutting inserts in turning Wear. ,vol. 248, pp. 29- 37 ,(2001) , 10.1016/S0043-1648(00)00494-4