Preparation of Cf/Cu–C contact strip and wear behaviour under electric current
作者： C. J. Tu , L. P. Deng , D. Chen , X. Z. Xiong , Y. F. Wang
DOI: 10.1179/1743284715Y.0000000140
关键词: Carbon 、 Electric current 、 Scanning electron microscope 、 Composite number 、 Flexural strength 、 Materials science 、 Electrical resistivity and conductivity 、 Pyrolytic carbon 、 Abrasive 、 Composite material
摘要: A novel carbon and copper fibre knitted fabric (Cf/Cu) reinforced contact strip (Cf/Cu–C) was fabricated by pyrolytic deposition resin impregnation–carbonisation process. The interface characteristics of the composite were characterised a scanning electron microscope metallographic microscope; resistivity, mechanical strength wear properties with electric current also investigated. results indicated that Cf/Cu–C material density 1.73 g cm− 3 combined quite well between phase contacting areas for each interface. With resistivity 10.16 μΩ m bending 123 MPa, as prepared outperformed present AR129 (density, 1.70 g cm− 3, 33 μΩ m; strength, 40 MPa). mechanisms proved to be slightly arc erosion abrasive wear.
sci-hub.se 参考文章(19)
S Kubo, J Ikeuchi, H Tsuchiya, WEAR PROPERTIES OF METAL/CARBON COMPOSITE PANTOGRAPH SLIDERS FOR CONVENTIONAL ELECTRIC VEHICLES Quarterly Report of Rtri. ,vol. 38, ,(1997)
C.R.F. Azevedo, A. Sinatora, Failure analysis of a railway copper contact strip Engineering Failure Analysis. ,vol. 11, pp. 829- 841 ,(2004) , 10.1016/J.ENGFAILANAL.2004.03.003
Takeo Oku, Tatsuo Oku, Effects of titanium addition on the microstructure of carbon/copper composite materials Solid State Communications. ,vol. 141, pp. 132- 135 ,(2007) , 10.1016/J.SSC.2006.10.013
S.F Moustafa, S.A El-Badry, A.M Sanad, B Kieback, Friction and wear of copper–graphite composites made with Cu-coated and uncoated graphite powders Wear. ,vol. 253, pp. 699- 710 ,(2002) , 10.1016/S0043-1648(02)00038-8
Haijun Zhao, Lei Liu, Yating Wu, Yiping Tang, Hezhou Liu, Friction and wear properties of copper matrix composites reinforced with short carbon fibers Materials & Design. ,vol. 29, pp. 257- 261 ,(2008) , 10.1016/J.MATDES.2006.11.011
Yoshitaka Kubota, Sei Nagasaka, Toru Miyauchi, Chikara Yamashita, Hideshi Kakishima, Sliding wear behavior of copper alloy impregnated C/C composites under an electrical current Wear. ,vol. 302, pp. 1492- 1498 ,(2013) , 10.1016/J.WEAR.2012.11.029
Y.Z. Wan, Y.L. Wang, H.L. Luo, X.H. Dong, G.X. Cheng, Effects of fiber volume fraction, hot pressing parameters and alloying elements on tensile strength of carbon fiber reinforced copper matrix composite prepared by continuous three-step electrodeposition Materials Science and Engineering A-structural Materials Properties Microstructure and Processing. ,vol. 288, pp. 26- 33 ,(2000) , 10.1016/S0921-5093(00)00887-X
Shunichi Kubo, Koji Kato, Effect of arc discharge on wear rate of Cu-impregnated carbon strip in unlubricated sliding against Cu trolley under electric current Wear. ,vol. 216, pp. 172- 178 ,(1998) , 10.1016/S0043-1648(97)00184-1
Xianzhi Xiong, Chuanjun Tu, Ding Chen, Jianqi Zhang, Jianghua Chen, Arc Erosion Wear Characteristics and Mechanisms of Pure Carbon Strip Against Copper Under Arcing Conditions Tribology Letters. ,vol. 53, pp. 293- 301 ,(2014) , 10.1007/S11249-013-0267-Y
P. Štefánik, P. Šebo, Thermal stability of copper coating on carbon fibres Journal of Materials Science Letters. ,vol. 12, pp. 1083- 1085 ,(1993) , 10.1007/BF00420528