Effect of calcium-rich compounds on setting time and strength development of alkali-activated fly ash cured at ambient temperature

作者: Prinya Chindaprasirt , Tanakorn Phoo-ngernkham , Sakonwan Hanjitsuwan , Suksun Horpibulsuk , Anurat Poowancum

DOI: 10.1016/J.CSCM.2018.E00198

关键词: Calcium hydroxideFly ashHydroxideSodiumCompressive strengthNuclear chemistrySodium hydroxidePortland cementCalcium oxideChemistry

摘要: Abstract This paper investigates the effect of calcium-rich compounds on setting time and compressive strength development alkali-activated fly ash (FA) pastes. Three viz., Portland cement (PC), calcium hydroxide (CH) oxide (CaO) were used as additives to replace FA at dosages 5, 10, 15% by weight basis. Sodium sodium silicate solutions alkali activator liquids in all mixtures. Alkali liquid/solid binder (FA compound) ratio 0.60, silicate-to-sodium 2.0 curing ambient temperature (25 °C) for mixes. Test results showed that depended type content compound. The incorporation three resulted acceleration time. Alkali-activated with CH PC could improve development; however, use CaO reduction. 28-day strengths 5%, 10% met requirement repair material specified ASTM standard. can thus be an alternative binding material.

参考文章(42)
P. Chindaprasirt, T. Cao, Setting, segregation and bleeding of alkali-activated cement, mortar and concrete binders Handbook of Alkali-Activated Cements, Mortars and Concretes. pp. 113- 131 ,(2015) , 10.1533/9781782422884.2.113
Tanakorn Phoo-ngernkham, Akihiro Maegawa, Naoki Mishima, Shigemitsu Hatanaka, Prinya Chindaprasirt, Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA–GBFS geopolymer Construction and Building Materials. ,vol. 91, pp. 1- 8 ,(2015) , 10.1016/J.CONBUILDMAT.2015.05.001
Tanakorn Phoo-ngernkham, Vanchai Sata, Sakonwan Hanjitsuwan, Charoenchai Ridtirud, Shigemitsu Hatanaka, Prinya Chindaprasirt, High calcium fly ash geopolymer mortar containing Portland cement for use as repair material Construction and Building Materials. ,vol. 98, pp. 482- 488 ,(2015) , 10.1016/J.CONBUILDMAT.2015.08.139
Benjamin C. McLellan, Ross P. Williams, Janine Lay, Arie van Riessen, Glen D. Corder, Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement Journal of Cleaner Production. ,vol. 19, pp. 1080- 1090 ,(2011) , 10.1016/J.JCLEPRO.2011.02.010
Tanakorn Phoo-ngernkham, Prinya Chindaprasirt, Vanchai Sata, Sakonwan Hanjitsuwan, Shigemitsu Hatanaka, The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured at ambient temperature Materials & Design. ,vol. 55, pp. 58- 65 ,(2014) , 10.1016/J.MATDES.2013.09.049
Saengsuree Pangdaeng, Tanakorn Phoo-ngernkham, Vanchai Sata, Prinya Chindaprasirt, Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive Materials & Design. ,vol. 53, pp. 269- 274 ,(2014) , 10.1016/J.MATDES.2013.07.018
W.K.W. Lee, J.S.J. van Deventer, The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements Cement and Concrete Research. ,vol. 32, pp. 577- 584 ,(2002) , 10.1016/S0008-8846(01)00724-4
Ubolluk Rattanasak, Prinya Chindaprasirt, Influence of NaOH solution on the synthesis of fly ash geopolymer Minerals Engineering. ,vol. 22, pp. 1073- 1078 ,(2009) , 10.1016/J.MINENG.2009.03.022
Chao Li, Henghu Sun, Longtu Li, A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements Cement and Concrete Research. ,vol. 40, pp. 1341- 1349 ,(2010) , 10.1016/J.CEMCONRES.2010.03.020