Particleboard from wood particles and sycamore leaves: Physico-mechanical properties
作者： Hamidreza Pirayesh , Payam Moradpour , Sima Sepahvand
DOI: 10.1016/J.EAEF.2014.07.003
关键词: Botany 、 Internal bonding 、 Composite material 、 Raw material 、 Furniture manufacturing 、 Absorption of water 、 Flexural strength 、 Swelling 、 Economic shortage 、 Materials science 、 Young's modulus
摘要: The aim of this study was to evaluate the physical and mechanical properties particleboards manufactured from mixture sycamore leaves wood particles. Five panel types were made mixtures particles/sycamore leave (100/0, 90/10, 80/20, 70/30 60/40%, respectively). Some (modulus rupture, modulus elasticity internal bonding strength) (thickness swelling water absorption) determined. results show that with incorporation up 20%, resulting improves. Nevertheless, all panels exceed minimum requirements EN Standards for furniture manufacturing. Using renewable bio materials like manufacturing could contribute solution raw material shortage particleboard industry, decreasing pressure on forest resources diminishing environmental problems regarding their burning.
elsevier.com
sci-hub.se 参考文章(26)
Hamideh Abdolzadeh, Kazem Doosthoseini, Ali Naghi Karimi, Ali Akbar Enayati, The effect of acetylated particle distribution and type of resin on physical and mechanical properties of poplar particleboard European Journal of Wood and Wood Products. ,vol. 69, pp. 3- 10 ,(2011) , 10.1007/S00107-009-0390-5
Yi Zheng, Zhongli Pan, Ruihong Zhang, Hamed M. El-Mashad, Jinming Pan, Bryan M. Jenkins, Anaerobic digestion of saline creeping wild ryegrass for biogas production and pretreatment of particleboard material Bioresource Technology. ,vol. 100, pp. 1582- 1588 ,(2009) , 10.1016/J.BIORTECH.2008.08.048
Hulya Kalaycioglu, Ilhan Deniz, Salim Hiziroglu, Some of the properties of particleboard made from paulownia Journal of Wood Science. ,vol. 51, pp. 410- 414 ,(2005) , 10.1007/S10086-004-0665-8
Kadir Ozkaya, Nadir Ayrilmis, Taner Dizel, Hasan Ozgur Imirzi, Utilization of extract of fresh tree leaves as extender in synthetic adhesives for laminated veneer lumber (LVL) Industrial Crops and Products. ,vol. 44, pp. 67- 70 ,(2013) , 10.1016/J.INDCROP.2012.10.025
Jae Gyoung Gwon, Sun Young Lee, Sang Jin Chun, Geum Hyun Doh, Jung Hyeun Kim, Effects of chemical treatments of hybrid fillers on the physical and thermal properties of wood plastic composites Composites Part A-applied Science and Manufacturing. ,vol. 41, pp. 1491- 1497 ,(2010) , 10.1016/J.COMPOSITESA.2010.06.011
Taghi Tabarsa, Alireza Ashori, Maria Gholamzadeh, Evaluation of surface roughness and mechanical properties of particleboard panels made from bagasse Composites Part B-engineering. ,vol. 42, pp. 1330- 1335 ,(2011) , 10.1016/J.COMPOSITESB.2010.12.018
Alireza Ashori, Amir Nourbakhsh, Effect of press cycle time and resin content on physical and mechanical properties of particleboard panels made from the underutilized low-quality raw materials Industrial Crops and Products. ,vol. 28, pp. 225- 230 ,(2008) , 10.1016/J.INDCROP.2008.02.015
Emiliano M. Ciannamea, Pablo M. Stefani, Roxana A. Ruseckaite, Medium-density particleboards from modified rice husks and soybean protein concentrate-based adhesives. Bioresource Technology. ,vol. 101, pp. 818- 825 ,(2010) , 10.1016/J.BIORTECH.2009.08.084
Hamidreza Pirayesh, Abolghasem Khazaeian, Taghi Tabarsa, The potential for using walnut (Juglans regia L.) shell as a raw material for wood-based particleboard manufacturing Composites Part B-engineering. ,vol. 43, pp. 3276- 3280 ,(2012) , 10.1016/J.COMPOSITESB.2012.02.016
Hamidreza Pirayesh, Abolghasem Khazaeian, Using almond (Prunus amygdalus L.) shell as a bio-waste resource in wood based composite Composites Part B-engineering. ,vol. 43, pp. 1475- 1479 ,(2012) , 10.1016/J.COMPOSITESB.2011.06.008