7.16 Materials in Fracture Fixation
作者： M.R. Cohn , A. Unnanuntana , T.J. Pannu , S.J. Warner , J.M. Lane
DOI: 10.1016/B978-0-12-803581-8.10109-2
关键词: Biomedical engineering 、 Bone healing 、 Fracture fixation 、 Patient factors 、 Intramedullary rod 、 Stress shielding 、 Surgery 、 External fixation 、 Biocompatibility 、 Fixation (surgical) 、 Materials science
摘要: The goal of fracture treatment is to obtain union, while restoring normal anatomy and function. With operative management, metallic alloys are commonly used fabricate devices for both internal external fixation. An interaction biocompatibility, mechanical requirements, corrosion resistance a fixation device required facilitate successful healing. Depending on the injury number patient factors, variety can be stabilize fracture, including plates, screws, intramedullary devices, fixators. This chapter discusses healing process basic requirements biomaterials in devices.
sci-hub.se 参考文章(198)
S. Mukherjee, S. Dhara, P. Saha, Enhancing the biocompatibility of Ti6Al4V implants by laser surface microtexturing: an in vitro study The International Journal of Advanced Manufacturing Technology. ,vol. 76, pp. 5- 15 ,(2015) , 10.1007/S00170-013-5277-2
A. Mass�, A. Bruno, M. Bosetti, A. Biasibetti, M. Cannas, P. Gallinaro, Prevention of pin track infection in external fixation with silver coated pins: Clinical and microbiological results Journal of Biomedical Materials Research. ,vol. 53, pp. 600- 604 ,(2000) , 10.1002/1097-4636(200009)53:5<600::AID-JBM21>3.0.CO;2-D
A. Moroni, V. L. Caja, M. C. Maltarello, L. Savarino, F. Marinelli, S. Stea, M. Visentin, S. Giannini, Biomechanical, scanning electron microscopy, and microhardness analyses of the bone-pin interface in hydroxyapatite coated versus uncoated pins. Journal of Orthopaedic Trauma. ,vol. 11, pp. 154- 161 ,(1997) , 10.1097/00005131-199704000-00003
Henning Richter, Michael Plecko, Daniel Andermatt, Robert Frigg, Peter W Kronen, Karina Klein, Katja Nuss, Stephen J Ferguson, Ulrich Stöckle, Brigitte von Rechenberg, Dynamization at the near cortex in locking plate osteosynthesis by means of dynamic locking screws: an experimental study of transverse tibial osteotomies in sheep. Journal of Bone and Joint Surgery, American Volume. ,vol. 97, pp. 208- 215 ,(2015) , 10.2106/JBJS.M.00529
M.P. Sealy, Y.B. Guo, Surface integrity and process mechanics of laser shock peening of novel biodegradable magnesium-calcium (Mg-Ca) alloy Journal of The Mechanical Behavior of Biomedical Materials. ,vol. 3, pp. 488- 496 ,(2010) , 10.1016/J.JMBBM.2010.05.003
L. Savarino, E. Cenni, S. Stea, M.E. Donati, G. Paganetto, A. Moroni, A. Toni, A. Pizzoferrato, X-ray diffraction of newly formed bone close to alumina- or hydroxyapatite-coated femoral stem Biomaterials. ,vol. 14, pp. 900- 905 ,(1993) , 10.1016/0142-9612(93)90131-K
Thomas A. Schildhauer, Thomas W. Bauer, Christoph Josten, Gert Muhr, Open reduction and augmentation of internal fixation with an injectable skeletal cement for the treatment of complex calcaneal fractures. Journal of Orthopaedic Trauma. ,vol. 14, pp. 309- 317 ,(2000) , 10.1097/00005131-200006000-00001
Mohit Bhandari, P. J. Devereaux, Michael D Mckee, Emil H Schemitsch, Compression plating versus intramedullary nailing of humeral shaft fractures—a meta-analysis Acta Orthopaedica. ,vol. 77, pp. 279- 284 ,(2006) , 10.1080/17453670610046037
S.C. Tandon, P.A. Gregson, P.B.M. Thomas, J. Saklatvala, J. Singanayagam, P.W. Jones, Reduction of post-traumatic osteoporosis after external fixation of tibial fractures Injury-international Journal of The Care of The Injured. ,vol. 26, pp. 459- 462 ,(1995) , 10.1016/0020-1383(95)00069-L
S.M. Best, A.E. Porter, E.S. Thian, J. Huang, Bioceramics: Past, present and for the future Journal of The European Ceramic Society. ,vol. 28, pp. 1319- 1327 ,(2008) , 10.1016/J.JEURCERAMSOC.2007.12.001