Integration of additive manufacturing and inkjet printed electronics: a potential route to parts with embedded multifunctionality
作者： Jonathan Stringer , Talal M Althagathi , Christopher CW Tse , Van Duong Ta , Jonathan D Shephard
关键词: Electronics 、 Embedded electronics 、 Scalability 、 Compatibility (mechanics) 、 Distributed manufacturing 、 Inkjet printing 、 Engineering 、 Temperature sensitive 、 Printed electronics 、 Manufacturing engineering
摘要: Additive manufacturing, an umbrella term for a number of different manufacturing techniques, has attracted increasing interest recently for a number of reasons, such as the …
edp-open.org
hw.ac.uk
warwick.ac.uk
paperity.org
core.ac.uk 参考文章(140)
Sung Hyun Jang, Sung Taek Oh, In Hwan Lee, Ho-Chan Kim, Hae Yong Cho, 3-dimensional circuit device fabrication process using stereolithography and direct writing International Journal of Precision Engineering and Manufacturing. ,vol. 16, pp. 1361- 1367 ,(2015) , 10.1007/S12541-015-0179-X
Duong V. Ta, Andrew Dunn, Thomas J. Wasley, Robert W. Kay, Jonathan Stringer, Patrick J. Smith, Colm Connaughton, Jonathan D. Shephard, Nanosecond laser textured superhydrophobic metallic surfaces and their chemical sensing applications Applied Surface Science. ,vol. 357, pp. 248- 254 ,(2015) , 10.1016/J.APSUSC.2015.09.027
Robert D. Deegan, Olgica Bakajin, Todd F. Dupont, Greb Huber, Sidney R. Nagel, Thomas A. Witten, Capillary flow as the cause of ring stains from dried liquid drops Nature. ,vol. 389, pp. 827- 829 ,(1997) , 10.1038/39827
Kazuhiro Murata, Junichi Matsumoto, Akira Tezuka, Yorishige Matsuba, Hiroshi Yokoyama, Super-fine ink-jet printing: toward the minimal manufacturing system symposium on design test integration and packaging of mems moems. ,vol. 12, pp. 2- 7 ,(2005) , 10.1007/S00542-005-0023-9
Angela L Dearden, Patrick J Smith, Dong‐Youn Shin, Nuno Reis, Brian Derby, Paul O'Brien, None, A Low Curing Temperature Silver Ink for Use in Ink‐Jet Printing and Subsequent Production of Conductive Tracks Macromolecular Rapid Communications. ,vol. 26, pp. 315- 318 ,(2005) , 10.1002/MARC.200400445
Yi Zhang, Christopher Tse, Davood Rouholamin, Patrick Smith, Scaffolds for tissue engineering produced by inkjet printing Central European Journal of Engineering. ,vol. 2, pp. 325- 335 ,(2012) , 10.2478/S13531-012-0016-2
Saud A. Algarni, Talal M. Althagafi, Patrick J. Smith, Martin Grell, An ionic liquid-gated polymer thin film transistor with exceptionally low “on” resistance Applied Physics Letters. ,vol. 104, pp. 182107- ,(2014) , 10.1063/1.4875746
Byoungyoon Lee, Yoonhyun Kim, Seungnam Yang, Inbum Jeong, Jooho Moon, A low-cure-temperature copper nano ink for highly conductive printed electrodes Current Applied Physics. ,vol. 9, ,(2009) , 10.1016/J.CAP.2009.03.008
Sung-Hyeon Park, Hak-Sung Kim, Flash light sintering of nickel nanoparticles for printed electronics Thin Solid Films. ,vol. 550, pp. 575- 581 ,(2014) , 10.1016/J.TSF.2013.11.075