Investigation on the static and dynamic characteristics of 3-DOF aerostatic thrust bearings with orifice restrictor

作者: Jianghai Shi , Hongrui Cao , Xiaoliang Jin

DOI: 10.1016/J.TRIBOINT.2019.06.026

关键词: Nonlinear systemMaterials scienceBody orificeFrequency ratioAerostatic thrust bearingMass flow ratePerturbation (astronomy)MechanicsVolumetric flow rateThrust bearing

摘要: Abstract This paper studies the static and dynamic characteristics of 3-DOF aerostatic thrust bearings with orifice restrictor. The coupled perturbation Reynolds equations are solved simultaneously for first time to obtain stiffness damping coefficients considering interaction between these equations. mass flow rate is considered in determining numerical convergence solution. developed model demonstrates nonlinear relationship air film thickness pressure. effect thickness, tilt angles, rotating speed frequency ratio on load capacity, moments, volume rate, evaluated. results from provide guidance design bearing required performance.

参考文章(29)
Siyu Gao, Kai Cheng, Shijin Chen, Hui Ding, Hongya Fu, CFD based investigation on influence of orifice chamber shapes for the design of aerostatic thrust bearings at ultra-high speed spindles Tribology International. ,vol. 92, pp. 211- 221 ,(2015) , 10.1016/J.TRIBOINT.2015.06.020
Cheng-Ying Lo, Cheng-Chi Wang, Yu-Han Lee, Performance analysis of high-speed spindle aerostatic bearings Tribology International. ,vol. 38, pp. 5- 14 ,(2005) , 10.1016/J.TRIBOINT.2004.04.008
G. Belforte, F. Colombo, T. Raparelli, A. Trivella, V. Viktorov, Performance of Externally Pressurized Grooved Thrust Bearings Tribology Letters. ,vol. 37, pp. 553- 562 ,(2010) , 10.1007/S11249-009-9550-3
Yang Lihua, Qi Shemiao, Yu Lie, Limits of Dynamic Coefficients of Self-Acting Tilting-Pad Gas Bearings Tribology Transactions. ,vol. 52, pp. 323- 330 ,(2009) , 10.1080/10402000802475346
Masaaki Miyatake, Shigeka Yoshimoto, Numerical investigation of static and dynamic characteristics of aerostatic thrust bearings with small feed holes Tribology International. ,vol. 43, pp. 1353- 1359 ,(2010) , 10.1016/J.TRIBOINT.2010.01.002
F. Al-Bender, H. Van Brussel, Tilt characteristics of circular centrally fed aerostatic bearings Tribology International. ,vol. 25, pp. 189- 197 ,(1992) , 10.1016/0301-679X(92)90048-R
S.H. Chang, C.W. Chan, Y.R. Jeng, Numerical analysis of discharge coefficients in aerostatic bearings with orifice-type restrictors Tribology International. ,vol. 90, pp. 157- 163 ,(2015) , 10.1016/J.TRIBOINT.2015.04.030
Ding-Wen Yang, Cheng-Hsien Chen, Yuan Kang, Ren-Ming Hwang, Shyh-Shyong Shyr, Influence of orifices on stability of rotor-aerostatic bearing system Tribology International. ,vol. 42, pp. 1206- 1219 ,(2009) , 10.1016/J.TRIBOINT.2009.04.002