Development of a model to evaluate the water level impact on drain cooling in horizontal high pressure feedwater heaters
作者： S.M. Hossienalipour , Sina Karbalaee M. , Hamed Fathiannasab
DOI: 10.1016/J.APPLTHERMALENG.2016.08.203
关键词: Water level 、 Power station 、 Feedwater heater 、 Nuclear engineering 、 Thermal efficiency 、 Boiler feedwater 、 Heat exchanger 、 Chemical substance 、 Shell and tube heat exchanger 、 Engineering 、 Mechanical engineering
摘要: Abstract Feedwater heaters play an important role in improving power plant thermal efficiency. High pressure feedwater are generally of shell and tube type heat exchangers which have three shrouded zones the shell. In present study, a mathematical model is suggested for performance evaluation three-zone heater. Proposed capable predicting effects variation liquid level load condition. The verified by experimental results existing literature. Then impact increase or decrease on characteristics evaluated typical horizontal high influence water drain cooler approach analyzed quantitatively. Results show sharp low It also shown that at full condition, heater more sensitive to changes.
sci-hub.se 参考文章(12)
Frank P. Incropera, Fundamentals of Heat and Mass Transfer ,(1985)
Hongton Liu, Sadik Kakaç, Heat Exchangers: Selection, Rating, and Thermal Design ,(1997)
P. J. MARTO, Heat Transfer and Two-Phase Flow during Shell-side Condensation Heat Transfer Engineering. ,vol. 5, pp. 31- 61 ,(1984) , 10.1080/01457638408962767
Mario Álvarez-Fernández, Luis del Portillo-Valdés, Cristina Alonso-Tristán, Thermal analysis of closed feedwater heaters in nuclear power plants Applied Thermal Engineering. ,vol. 68, pp. 45- 58 ,(2014) , 10.1016/J.APPLTHERMALENG.2014.04.006
G. E. Weber, W. M. Worek, The Application of a Method to Evaluate the Design Performance of a Feedwater Heater With a Short Drain Cooler Journal of Engineering for Gas Turbines and Power. ,vol. 117, pp. 384- 388 ,(1995) , 10.1115/1.2814106
Irfan S. Hussaini, Syed M. Zubair, M.A. Antar, Area allocation in multi-zone feedwater heaters Energy Conversion and Management. ,vol. 48, pp. 568- 575 ,(2007) , 10.1016/J.ENCONMAN.2006.06.003
Jian-qun Xu, Tao Yang, You-yuan Sun, Ke-yi Zhou, Yong-feng Shi, Research on varying condition characteristic of feedwater heater considering liquid level Applied Thermal Engineering. ,vol. 67, pp. 179- 189 ,(2014) , 10.1016/J.APPLTHERMALENG.2014.02.034
K. P. Singh, On Some Performance Parameters for Closed Feedwater Heaters Journal of Pressure Vessel Technology-transactions of The Asme. ,vol. 109, pp. 200- 204 ,(1987) , 10.1115/1.3264896
G. E. Weber, W. M. Worek, Development of a method to evaluate the design performance of a feedwater heater with a short drain cooler Journal of Engineering for Gas Turbines and Power-transactions of The Asme. ,vol. 116, pp. 434- 441 ,(1994) , 10.1115/1.2906840
L. C. Finlay, Some Aspects of Feed Heater Design Proceedings of the Institution of Mechanical Engineers. ,vol. 175, pp. 1157- 1168 ,(1961) , 10.1243/PIME_PROC_1961_175_076_02