Gear mechanism and reduction planetary gear
作者： Hidekazu Okufuji , Masahiro Tsunemi , Teruhisa Ando , Masataka Kojima
DOI:
关键词: Structural engineering 、 Spiral bevel gear 、 Mechanism (engineering) 、 Engineering 、 Reduction (orthopedic surgery)
摘要: In a gear mechanism, inner teeth and outer are formed of high-tooth. An engagement ratio the is configured so as to be 2.0 or more, whereby load can transferred between via continuous at least two pairs thereof. Accordingly, contact face pressure bending stress occurring reduced, limitation durability mechanism due large difference improved, necessity increasing hardness lessened.
lens.org 参考文章(23)
Josef Kunnen, Heinz Benthake, Single or multi-step planetary gearing ,(1974)
Sivakumar Sundaresan, Todd C. Rose, Method of designing uniform motion, substantially vibration-free spur gears ,(1998)
Bryan G. Lammers, Final drive assembly ,(1990)
Wilhelm Koster, Karl-Heinz Jakubowski, Uwe Abraham, Holding a planetary gear carrier relative to an axle ,(1981)
Unal Gazyakan, Michael Roske, Electrical individual wheel drive with several motors ,(2000)
Richard M. Hawkins, Non-involute gears with conformal contact ,(2002)
Hermann Pecnik, Helmut Stelzl, Axle drive block with a differential lock ,(2003)
Raymond Drago, High profile contact ratio, non-involute gear tooth form and method ,(1983)
John R. Colbourne, Gear tooth profile ,(2003)
Hanjoon Alex Kim, Mark T. Wyeth, Mark Anderson Allen, Multi-mesh gear system ,(2002)