Variance-based sensitivity analysis of tangential digging forces of the bucket wheel excavator SchRs 1320
作者： Zdenek Kala , Jakub Gottvald
DOI:
关键词: Variance-based sensitivity analysis 、 Sensitivity (control systems) 、 Engineering 、 Digging 、 Excavator 、 Tangential force 、 Simulation 、 Sensitivity analyses 、 Structural engineering
摘要: Tangential digging force is one of the basic descriptive parameters bucket wheel excavators (BWE). Knowledge factors that influence its value necessary for correct design and motors with gearbox. Presented paper deals sensitivity vary during mining to total tangential force. Analyses were made BWE SchRs 1320. On this measured used analyses.
参考文章(16)
Zdenek Kala, Jiri Kala, Resistance of plate girders under combined bending and shear EMESEG'10 Proceedings of the 3rd WSEAS international conference on Engineering mechanics, structures, engineering geology. pp. 166- 171 ,(2010)
Jakub Gottvald, The calculation and measurement of the natural frequencies of the bucket wheel excavator schrs 1320/4X30 Transport. ,vol. 25, pp. 269- 277 ,(2010) , 10.3846/TRANSPORT.2010.33
Jonas Amšiejus, Rimantas Kačianauskas, Arnoldas Norkus, Liudas Tumonis, Investigation of the Sand Porosity via Oedometric Testing Baltic Journal of Road and Bridge Engineering. ,vol. 5, pp. 139- 147 ,(2010) , 10.3846/BJRBE.2010.20
Zdeněk Kala, Sensitivity analysis of stability problems of steel plane frames Thin-walled Structures. ,vol. 49, pp. 645- 651 ,(2011) , 10.1016/J.TWS.2010.09.006
Zdeněk Kala, Sensitivity analysis of steel plane frames with initial imperfections Engineering Structures. ,vol. 33, pp. 2342- 2349 ,(2011) , 10.1016/J.ENGSTRUCT.2011.04.007
Zdeněk Kala, Libor Puklický, Abayomi Omishore, Marcela Karmazínová, Jindřich Melcher, Stability problems of steel‐concrete members composed of high‐strength materials Journal of Civil Engineering and Management. ,vol. 16, pp. 352- 362 ,(2010) , 10.3846/JCEM.2010.40
Srđan M. Bošnjak, Miodrag A. Arsić, Nenad Đ. Zrnić, Marko P. Rakin, Milorad P. Pantelić, Bucket wheel excavator: Integrity assessment of the bucket wheel boom tie-rod welded joint Engineering Failure Analysis. ,vol. 18, pp. 212- 222 ,(2011) , 10.1016/J.ENGFAILANAL.2010.09.001
Zdeněk Kala, Sensitivity analysis of the stability problems of thin-walled structures Journal of Constructional Steel Research. ,vol. 61, pp. 415- 422 ,(2005) , 10.1016/J.JCSR.2004.08.005
J. Amšiejus, N. Dirgėlienė, A. Norkus, D. Žilionienė, Evaluation of Soil Shear Strength Parameters Via Triaxial Testing by Height Versus Diameter Ratio of Sample Baltic Journal of Road and Bridge Engineering. ,vol. 4, pp. 54- 60 ,(2009) , 10.3846/1822-427X.2009.4.54-60
Eugeniusz Rusiński, Piotr Harnatkiewicz, Marcin Kowalczyk, Przemysław Moczko, Examination of the causes of a bucket wheel fracture in a bucket wheel excavator Engineering Failure Analysis. ,vol. 17, pp. 1300- 1312 ,(2010) , 10.1016/J.ENGFAILANAL.2010.03.004