Studies on Boron Containing Poly(urethane fattyamide)

作者: Fahmina Zafar , Mohammad Kashif , Eram Sharmin , Sharif Ahmad , None

DOI: 10.1002/MASY.201050409

关键词: Boric acidPongamiaBoronDrying oilAntibacterial activityMaterials scienceSolventOrganic chemistryAddition polymerChemical resistance

摘要: Summary: An attempt has been made to synthesize boron containing poly (urethane-fattyamide) [B-PUPGFA] through the incorporation of in backbone non drying oil such as Pongamia glabra derived (urethane-fattyamide). The synthesis route involves 50% reduction use harmful volatile organic contents [VOCs] and was carried out situ by condensation reaction between N, N′-bis (2-hydroxyethyl) fattyamide boric acid without solvent followed addition polymerization with toluene diisocyanate minimum solvent. Spectral (FTIR, 1H-NMR 13C-NMR), physico-chemical, physico-mechanical chemical resistance B-PUPGFA standard laboratory methods. antibacterial performance done agar diffusion method against E. coli S. aureus. aforementioned compared based virgin [PUPGFA]. It is observed that a significant influence on overall film, which shows activity Therefore, serves novel promising biomaterial candidate for anticorrosive coating material.

参考文章(26)
G. Ambadas, S. Packirisamy, K. N. Ninan, Synthesis, characterization and thermal properties of boron and silicon containing preceramic oligomers Journal of Materials Science Letters. ,vol. 21, pp. 1003- 1005 ,(2002) , 10.1023/A:1016004522824
Jouni Uusi-Simola, Sami Heikkinen, Petri Kotiluoto, Tom Serén, Tiina Seppälä, Iiro Auterinen, Sauli Savolainen, MAGIC polymer gel for dosimetric verification in boron neutron capture therapy Journal of Applied Clinical Medical Physics. ,vol. 8, pp. 114- 123 ,(2007) , 10.1120/JACMP.V8I2.2409
Fukashi Matsumoto, Yoshiki Chujo, Synthesis of transition-metal-containing poly(pyrazabole)s Pure and Applied Chemistry. ,vol. 78, pp. 1407- 1411 ,(2006) , 10.1351/PAC200678071407
Deewan Akram, Eram Sharmin, Sharif Ahmad, Synthesis and Characterization of Boron Incorporated Polyester Polyol from Linseed Oil: A Sustainable Material Macromolecular Symposia. ,vol. 277, pp. 130- 137 ,(2009) , 10.1002/MASY.200950316
Hongying Dong, Xiaojing Zhu, Kathy Lu, Morphology and composition of nickel–boron nanolayer coating on boron carbide particles Journal of Materials Science. ,vol. 43, pp. 4247- 4256 ,(2008) , 10.1007/S10853-008-2615-0
Jungang Gao, Xiaohui Su, Liya Xia, Synthesis and Structure Characterization of Boron-Nitrogen Containing Phenol Formaldehyde Resin International Journal of Polymeric Materials. ,vol. 54, pp. 949- 961 ,(2005) , 10.1080/009140390504762
F. Seniha Güner, Yusuf Yağcı, A. Tuncer Erciyes, Polymers from triglyceride oils Progress in Polymer Science. ,vol. 31, pp. 633- 670 ,(2006) , 10.1016/J.PROGPOLYMSCI.2006.07.001
Deewan Akram, Eram Sharmin, Sharif Ahmad, Synthesis, characterization and corrosion protective properties of boron-modified polyurethane from natural polyol Progress in Organic Coatings. ,vol. 63, pp. 25- 32 ,(2008) , 10.1016/J.PORGCOAT.2008.04.003
Dejan D. Andjelkovic, Richard C. Larock, Novel rubbers from cationic copolymerization of soybean oils and dicyclopentadiene. 1. Synthesis and characterization. Biomacromolecules. ,vol. 7, pp. 927- 936 ,(2006) , 10.1021/BM050787R