Effect of the stuffer yarns on the mechanical performance of novel 3D woven green composites
作者： Madeha Jabbar , Khubab Shaker , Yasir Nawab , Muhammad Umair
DOI: 10.1016/J.COMPSTRUCT.2021.114023
关键词: Compression (physics) 、 Crimp 、 Flexural strength 、 Ultimate tensile strength 、 Materials science 、 Yarn 、 LOOM 、 Epoxy 、 Composite material 、 Tension (physics)
摘要: Abstract Determination of mechanical properties 3D woven reinforcements is crucial for tailoring the required end application. The current study presents an investigation performance novel composites’ structures. Various fabrics with variation in stuffer yarn density were designed, produced and their such as tensile, shear, drop weight impact compression after investigated. Reinforcements developed on a modified Dobby loom from flax four different levels densities. Machine modification ensured controlled amount tension during reinforcement production similar sets yarns crimp percentage. Composites fabricated using these green epoxy matrix. It was observed that flexural are significantly improved by increasing density.
sci-hub.st 参考文章(50)
Khubab Shaker, Munir Ashraf, Madeha Jabbar, Salma Shahid, Yasir Nawab, Jasim Zia, Abdur Rehman, None, Bioactive woven flax-based composites: Development and characterisation: Journal of Industrial Textiles. ,vol. 46, pp. 549- 561 ,(2016) , 10.1177/1528083715591579
Sergio Neves Monteiro, Luis Henrique Leme Louro, Willian Trindade, Carlos Nelson Elias, Carlos Luiz Ferreira, Eduardo de Sousa Lima, Ricardo Pondé Weber, João Carlos Miguez Suarez, André Ben-Hur da Silva Figueiredo, Wagner Anacleto Pinheiro, Luis Carlos da Silva, Édio Pereira Lima, Natural Curaua Fiber-Reinforced Composites in Multilayered Ballistic Armor Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science. ,vol. 46, pp. 4567- 4577 ,(2015) , 10.1007/S11661-015-3032-Z
X. Wang, B. Hu, Y. Feng, F. Liang, J. Mo, J. Xiong, Y. Qiu, Low velocity impact properties of 3D woven basalt/aramid hybrid composites Composites Science and Technology. ,vol. 68, pp. 444- 450 ,(2008) , 10.1016/J.COMPSCITECH.2007.06.016
Clément Dufour, Peng Wang, François Boussu, Damien Soulat, None, Experimental Investigation About Stamping Behaviour of 3D Warp Interlock Composite Preforms Applied Composite Materials. ,vol. 21, pp. 725- 738 ,(2014) , 10.1007/S10443-013-9369-9
N.M. Barkoula, S.K. Garkhail, T. Peijs, Biodegradable composites based on flax/polyhydroxybutyrate and its copolymer with hydroxyvalerate Industrial Crops and Products. ,vol. 31, pp. 34- 42 ,(2010) , 10.1016/J.INDCROP.2009.08.005
Y. Nawab, X. Legrand, V. Koncar, Study of changes in 3D-woven multilayer interlock fabric preforms while forming Journal of The Textile Institute. ,vol. 103, pp. 1273- 1279 ,(2012) , 10.1080/00405000.2012.676267
Rajesh Mishra, Jiri Militky, B.K. Behera, Vishal Banthia, Modelling and simulation of 3D orthogonal fabrics for composite applications Journal of The Textile Institute. ,vol. 103, pp. 1255- 1261 ,(2012) , 10.1080/00405000.2012.675682
R. Muñoz, F. Martínez-Hergueta, F. Gálvez, C. González, J. LLorca, Ballistic performance of hybrid 3D woven composites: Experiments and simulations Composite Structures. ,vol. 127, pp. 141- 151 ,(2015) , 10.1016/J.COMPSTRUCT.2015.03.021
Rajesh Mishra, Impact tolerance of 3D woven nanocomposites: a simulation approach Journal of The Textile Institute. ,vol. 104, pp. 562- 570 ,(2013) , 10.1080/00405000.2012.752123
Robert Gerlach, Clive R. Siviour, Jens Wiegand, Nik Petrinic, In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading Composites Science and Technology. ,vol. 72, pp. 397- 411 ,(2012) , 10.1016/J.COMPSCITECH.2011.11.032