Experimental investigation and CFD modeling of the dynamics of bubbles in nanofluid pool boiling
作者： Sina Nabati Shoghl , Masoud Bahrami , Mostafa Keshavarz Moraveji
DOI: 10.1016/J.ICHEATMASSTRANSFER.2014.07.027
关键词: Porosity 、 Bubble 、 Boiling 、 Nanoparticle 、 Pulmonary surfactant 、 Materials science 、 Contact angle 、 Nanotechnology 、 Nanofluid 、 Chemical engineering 、 Wetting
摘要: This work investigated the dynamics of bubbles in pool boiling nanofluid with coated and sodium dodecyl sulfate (SDS) solution different nanoparticles. Also, computational fluid (CFD) module was used for mathematical modeling pure water boiling. Different macroscale parameters such as: shapes, numbers contact angle also were experimentally verified by CFD results. Porous layers nanoparticles on stainless steel substrate conjunction SDS additions shown to modify formation comparison reference condition. Improvement surface hydrophilic conditions performance observed Multi-wall Carbon Nanotube (MWCNT) porous layers, spite CuO Al2O3 (γ) based nanofluid. Growth time changes presence surfactant which resulted from change tension force. Number increased MWCNT decreased boiling. Results showed comprehensive bubble wettability layer solution.
elsevier.com
sci-hub.se 参考文章(30)
C. M. Spuckler, J. C. Aydelott, T. H. Cochran, Experimental investigation of nucleate boiling bubble dynamics in normal and zero gravities ,(1968)
I.C. Bang, S.J. Kim, L.W. Hu, J. Buongiorno, Study of pool boiling and critical beat flux enhancement in nanofluids Bulletin of The Polish Academy of Sciences-technical Sciences. ,vol. 55, pp. 211- 216 ,(2007)
W.-T Wu, Y.-M Yang, J.-R Maa, Technical Note Pool boiling incipience and vapor bubble growth dynamics in surfactant solutions International Journal of Heat and Mass Transfer. ,vol. 42, pp. 2483- 2488 ,(1999) , 10.1016/S0017-9310(98)00335-4
Y. Y. Hsu, On the Size Range of Active Nucleation Cavities on a Heating Surface Journal of Heat Transfer. ,vol. 84, pp. 207- 213 ,(1962) , 10.1115/1.3684339
Mostafa Keshavarz Moraveji, Mehdi Darabi, Seyyed Mohammad Hossein Haddad, Reza Davarnejad, Modeling of convective heat transfer of a nanofluid in the developing region of tube flow with computational fluid dynamics International Communications in Heat and Mass Transfer. ,vol. 38, pp. 1291- 1295 ,(2011) , 10.1016/J.ICHEATMASSTRANSFER.2011.06.011
Mostafa Keshavarz Moraveji, Majid Hejazian, CFD Examination of Convective Heat Transfer and Pressure Drop in a Horizontal Helically Coiled Tube with CuO/Oil Base Nanofluid Numerical Heat Transfer Part A-applications. ,vol. 66, pp. 315- 329 ,(2014) , 10.1080/10407782.2013.872976
Saeed Zeinali Heris, Experimental investigation of pool boiling characteristics of low-concentrated CuO/ethylene glycol–water nanofluids ☆ International Communications in Heat and Mass Transfer. ,vol. 38, pp. 1470- 1473 ,(2011) , 10.1016/J.ICHEATMASSTRANSFER.2011.08.004
Sina N. Shoghl, M. bahrami, Experimental investigation on pool boiling heat transfer of ZnO, and CuO water-based nanofluids and effect of surfactant on heat transfer coefficient ☆ International Communications in Heat and Mass Transfer. ,vol. 45, pp. 122- 129 ,(2013) , 10.1016/J.ICHEATMASSTRANSFER.2013.04.015
Sung Joong Kim, In Cheol Bang, Jacopo Buongiorno, LW Hu, None, Surface wettability change during pool boiling of nanofluids and its effect on critical heat flux International Journal of Heat and Mass Transfer. ,vol. 50, pp. 4105- 4116 ,(2007) , 10.1016/J.IJHEATMASSTRANSFER.2007.02.002
Majid Hejazian, Mostafa Keshavarz Moraveji, A Comparative Analysis of Single and Two-Phase Models of Turbulent Convective Heat Transfer in a Tube for TiO2Nanofluid with CFD Numerical Heat Transfer Part A-applications. ,vol. 63, pp. 795- 806 ,(2013) , 10.1080/10407782.2013.756759