Utilisation of waste marble powder as low-cost cementing materials in the production of mortar

作者: Omrane Benjeddou , Rayed Alyousef , Hossein Mohammadhosseini , Chokri Soussi , Mohamed Amine Khadimallah

DOI: 10.1016/J.JOBE.2020.101642

关键词: Theoretical modelsCementMortarLower costCompressive strengthMaterials scienceStatistical analysisMetallurgy

摘要: Abstract Marble industries produce vast amounts of wastes, and this is detrimental to the environment. Accordingly, these waste materials require appropriate management ensure a cleaner Given that, utilisation recycled in construction desirable, owing space saved from landfill purposes reduction carbon dioxide (CO2) as well lower cost related materials. Subsequently, paper investigated effects adding marble powder (WMP) filler on strength performance mortar, with different Blaine Specific Surface (BSS) precise class resistance Artificial Cement Portland CEM I 42.5. The experimental investigation statistical analysis were carried out mortar mixes containing four types (F1, F2, F3, F4) BSS values 3860, 5640, 7620 9280 cm2/g, respectively. Substitution rates 5, 15, 25% applied. In addition, water/cement + filler ratios (W/(C + F)) or W/Ceq true new cement measured for each mix. Moreover, theoretical models (termed equivalence models), which enabled determination function used fillers substitution rate, developed. obtained results revealed that 5% by provided compressive similar control mix all filler. However, further increase reduced. both presented good agreement. It was concluded proper use partial replacement would have environmental benefits, simultaneously, feasibility stone industries.

参考文章(34)
Pierre Mounanga, Muhammad Irfan Ahmad Khokhar, Rana El Hachem, Ahmed Loukili, Improvement of the early-age reactivity of fly ash and blast furnace slag cementitious systems using limestone filler Materials and Structures. ,vol. 44, pp. 437- 453 ,(2011) , 10.1617/S11527-010-9637-1
Luis G Baltazar, Fernando MA Henriques, Fernando Jorne, None, Optimisation of flow behaviour and stability of superplasticized fresh hydraulic lime grouts through design of experiments Construction and Building Materials. ,vol. 35, pp. 838- 845 ,(2012) , 10.1016/J.CONBUILDMAT.2012.04.084
M.T. Bassuoni, M.L. Nehdi, Resistance of Self-consolidating Concrete to Sulfuric Acid Attack with Consecutive pH Reduction Cement and Concrete Research. ,vol. 37, pp. 1070- 1084 ,(2007) , 10.1016/J.CEMCONRES.2007.04.014
Valeria Corinaldesi, Giacomo Moriconi, Tarun R. Naik, Characterization of marble powder for its use in mortar and concrete Construction and Building Materials. ,vol. 24, pp. 113- 117 ,(2010) , 10.1016/J.CONBUILDMAT.2009.08.013
Tayfun Uygunoğlu, İlker Bekir Topçu, Atila Gürhan Çelik, Use of waste marble and recycled aggregates in self-compacting concrete for environmental sustainability Journal of Cleaner Production. ,vol. 84, pp. 691- 700 ,(2014) , 10.1016/J.JCLEPRO.2014.06.019
R. Rosković, D. Bjegović, Role of mineral additions in reducing CO2 emission Cement and Concrete Research. ,vol. 35, pp. 974- 978 ,(2005) , 10.1016/J.CEMCONRES.2004.04.028
Frank Collins, Inclusion of carbonation during the life cycle of built and recycled concrete: influence on their carbon footprint International Journal of Life Cycle Assessment. ,vol. 15, pp. 549- 556 ,(2010) , 10.1007/S11367-010-0191-4
Yunus Ballim, Peter C. Graham, The effects of supplementary cementing materials in modifying the heat of hydration of concrete Materials and Structures. ,vol. 42, pp. 803- 811 ,(2009) , 10.1617/S11527-008-9425-3
Luc Courard, Julie Piérard, Frédéric Michel, Valérie Pollet, Influence of physico-chemical characteristics of limestone fillers on fresch and hardened mortar performances RILEM Publications S.A.R.L. ,(2007)